An FH binary orthogonal FSK system employs an m 15 stage liner feedback shift register that generates an ML sequence. Each state of the shift register selects one of L non over lapping frequency bands in the hopping pattern. The bit rate is 100 bits/s. The demodulator employ non coherent detection. If the hop rate is one per bit, the hopping bandwidth for this channel is?

Bipolar Junction Triodes (BJTs) topics include: The basics of BJT, device structures and physical operations, circuits, current-voltage properties, amplifier design, signal operations and circuit configuration and biasing. A Bipolar Junction Transistor (BJT) is a three-terminal semiconductor device that can amplify signals. It's a current-controlled device that consists of two p-n junctions, a common region called the base, and two outer regions called the emitter and collector.  BJTs are known as bipolar transistors because they involve the operation of charge carriers of both polarities.... Show more

Bipolar Junction Triodes (BJTs) topics include: The basics of BJT, device structures and physical operations, circuits, current-voltage properties, amplifier design, signal operations and circuit configuration and biasing.

A Bipolar Junction Transistor (BJT) is a three-terminal semiconductor device that can amplify signals. It's a current-controlled device that consists of two p-n junctions, a common region called the base, and two outer regions called the emitter and collector. 

BJTs are known as bipolar transistors because they involve the operation of charge carriers of both polarities. They can function as current regulators by allowing a small current to control a larger current. 
BJTs can consist of either a P-N-P or an N-P-N semiconductor “sandwich” structure. In a PNP transistor, the regions are, respectively, p type, n type, and p type. In an NPN transistor, the regions are n type, p type, and n type. 

Show less