Home > Additive Manufacturing Technician (3D Printing) > Quizzes > Additive Manufacturing Technician (3D Printing) Practice Test: Metrology & Interchangeability
Additive Manufacturing Technician (3D Printing) Practice Test: Metrology & Interchangeability
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 74% • Most missed: “What do we call the gear connected to the input power source, such as a motor?”
Additive Manufacturing Technician (3D Printing) Practice Test: Metrology & Interchangeability
Time left 00:00
25 Questions

1. A dimension is stated as 10±0.02 mm in drawing. What is the tolerance in mm?
2. A sine bar is available in standard sizes. Which one of the following is not a standard size?
3. Try square is used to check u an angle of?
4. What is the use of ratchet stop in micrometer?
5. What do we call the gear connected to the input power source, such as a motor?
6. Which measuring tool is used to measure external, internal and depth measurements?
7. Which type of gauge is GO and NO GO?
8. What is the main purpose of Wringing of slip gauges?
9. Which of the following is incorrect about micrometer?
10. What is determined while measuring a component?
11. Which of the following is used to checking flatness and squareness of a surface?
12. Which of the following instrument is used to measure angle of taper?
13. The micrometer works on the principle of?
14. In a metric micrometer , a complete revolution of thimble advances?
15. What is the least count of a Vernier caliper?
16. What is called the science of measurement?
17. What is the reading shown in this fig?
18. A shaft is fitted in a hole. The tolerance zone of the pin is entirely above that hole. What is the fit obtained?
19. Which one of the following instrument is used to check the concentricity of the outside diameter?
20. Which of the following is used to check external diameter of shaft?
21. What happens to speed when you increase torque?
22. Which is the main part of a micrometer which all other parts are attached to this?
23. The main scale reading is marked on which part of the vernier caliper?
24. What is the difference between the maximum and minimum sizes allowed in manufacturing a component?
25. Which part of a micrometer is made of alloy steel and finished to a perfectly flat surface?

⚡ Recently practiced quizzes in this topic
Live quiz activity
Additive Manufacturing Technician (3D Printing) Practice Test: Safety, Basic Computer & Engineering Drawing 3D Printing Knowledge Test
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | OSHA Basics Quiz | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.