Home > Class 11 Biology > Quizzes > NOCTI Woodwork Prep
NOCTI Woodwork Prep
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 60% Most missed: “The particleboard used for most cabinets is ________________________.”
NOCTI Woodwork Prep
Time left 00:00
25 Questions

1. When a wood filler is applied, the surface should be wiped down _____________________.

2. A cabinet door hinge used on flush doors when it is desired to conceal most of the hardware is a(n) _____________________ hinge.

3. The most difficult type of door to fit to a cabinet is a(n) _________________ door.

4. Always sand ____________________ the grain.

5. Biscuits should be kept until use in a(n) _____________________.

6. The typical thickness of plastic laminate used on countertops is _________________________.

7. When using a penetrating stain, an area that has been stained too dark can be lightened by _______________________.

8. The joint in the picture is a _______________________ joint.

9. A typical thickness setting for a thickness planer is ________________________.

10. The sandpaper most likely to be used for paint removal is _____________________ grit.

11. The two types of particle board used in cabinetmaking are ___________________.

12. Make sure the infeed and outfeed tables on the jointer-planer are __________________________.

13. The purpose of a kerf spreader on a table saw is to ______________.

14. To cut a dado joint, use a _____________________.

15. An orange-brown wood, grown from the Everglades, Central America and the Amazon Basin, and considered the finest cabinet wood in the world, is ______________________________.

16. When attaching a nail gun or brad gun to an air hose, point it _________________________.

17. If a defect-free softwood plywood is specified for use in a cabinet, the plywood used should be graded ______________.

18. When using the jointer, do not work wood that is less than _________________________.

19. A door that is rabbeted along all of its edges is a(n) ________________ door.

20. When using a drill press, make sure the workpiece is ____________________.

21. The best choice of material for use in a countertop to be covered with plastic laminate is _________________________.

22. Philippine mahogany is also called ___________________________.

23. A close-grained, light-colored, fairly soft wood that is primarily used for veneers and economically-priced furniture is _________________________.

24. Sealers are used to prevent wood from absorbing too much __________________.

25. The figure shows ___________________________