Home > CWNA > Quizzes > CWNA 802.11 Network Security
CWNA 802.11 Network Security
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 7% Most missed: “RBAC is an approach to restricting system access to authorized users. The three …”
CWNA 802.11 Network Security
Time left 00:00
25 Questions

1. Under the 802.11i amendment - two stations (STAs) must establish a procedure to authenticate and associate with each other as well as create dynamic encryption keys through a process known as the 4-Way Handshake.

2. Is a Layer 3 VPN technology. IPsec can use RC4 - DES - 3DES and AES ciphers for encryption. It provides for encryption - encapsulation - data integrity - and device authnetication.

3. An 802.11 wireless network that allows for the creation of pre-robust security network associations (pre-RSNAs) as well as RSNAs is known as a transition security network. A TSN supports 802.11i-defined security as well as legacy security such as WEP

4. Extensible Authentication Protocol (EAP) is used to provide user authentication for an 802.1X port-based access control solution. EAP is a flexable layer 2 authentication protocol that resides under P2P protocol (PPP)

5. MPPE is a 128-bit encryption method that uses the RC4 algorithm. MPPE is used with P2P tunneling protocol (PPTP) VPN technology.

6. A method of distributing encryption passphrases or keys by manually typing the matching passphrases or keys on both the access point and all client stations that will need to be able to associate to the wireless network. This information is shared ah

7. Prior to the ratification of the 802.11i amendment - the Wi-Fi alliance introduced WPA certification as a snapshot of the not yet released 802.11i amendment - supporting only the TKIP/RC4 dynamic encryption key mangement. 802.1X/EAP authentication wa

8. When an 802.1X/EAP solution is deployed - a device that blocks or allows traffic to pass through its port secuirty is known as the authenticator. Authentication traffic is normally allowed to pass through the authenticator while all other traffic is

9. TKIP uses a data integrity check known as Message Integrity Check (MIC) to mitigate known bit-flipping attacks against WEP. The MIC is sometimes referred to by the nickname Micheal.

10. PPTP is a layer 3 VPN technology. It uses 128-bit Microsoft point-to-point encryption (MPPE) - which uses the RC4 algorithm. MPPE encryption is considered adequate but not strong. PPTP also uses MS-CHAP version 2 for user authentication - which is su

11. TKIP is an enhancement of WEP encryption that address many of the known weaknesses of WEP. TKIP starts with a 128-bit temporal key that is combined with a 48-bit Initialization Vector (IV) and source and destination MAC addresses in a complicated pro

12. The IV is utilized by the RC4 steaming chipher that WEP encryption uses. The IV is a block of 24 bits that is combined with a static key. It is sent in cleartext and is different on every frame. The effective key strength of combining the IV with the

13. The AES algorithm - orginally named Rijandael Aligorithm - is a block cipher that offers much stronger protection than the RC4 Streaming cipher. AES is used to encrypt 802.11 wireless data by using an encryption method known as Counter mode with Ciph

14. A robust security network (RSN) is a network that only allows for the creation of robust secuirty network associations (RSNAs). An RSN utilizes CCMPAES encryption as well as 802.1X/EAP authentication

15. Algorithm is a streaming cipher used in technologies that are often used to protect Internet traffic - such as Secure Sockets Layer (SSL). The RC4 algorithm is used to protect 802.11 wireless data and is incorporated into two encryption methods known

16. When an 802.1X/EAP solution is deployed - a host with software that is requesting authentication and access to network resources is known as the supplicant

17. WEP is a layer 2 encryption method that uses the RC4 streaming cipher. The orginal 802.11 standard defined 64-bit and 128-bit WEP. WEP encryption has been cracked and is not considered a strong encryption method.

18. After an EAP frame exchange where mutal authentication is required - both the AS and the supplicant known infomration about each other because of the exchanging of credentials. This newfound information is used as seeding material or keying material

19. As defined by the 802.11i security amendment - two stations (STAs) must establish a procedure to authenticate an associate with each other as well as create dynamic encryption keys through a process known as 4-Way Handshake. This association between

20. When 802.1X/EAP solution is deployed - an authentication server validates the credentials of the supplicant that is requesting access and notifies the authenticator that the supplicant has been authorized. The authentication server will maintain a us

21. The default encryption method defined under 802.11i amendment. This method uses the AES Cipher. CCMP/AES uses a 128-bit encryption key size and encrypts in 128-bit fixed-length blocks. An 8-byte Message Integrity Check is used that is considered much

22. Is based on security mechanisms that were orginally defined in the IEEE 802.11i amendment defining a robust security network (RSN). 2 versions of WPA2 exist. WPA2-personal defines security for a small office - home office SOHO ennvironment - and WPA2

23. Is a secuirty concept. Authorization involves granting access to network resources and services. Before authorization to network resources can be granted - proper authentication must occur. Authentication is the verification of user identity and cred

24. RBAC is an approach to restricting system access to authorized users. The three main components of RBAC approach are users - roles and permissions. Separate roles can be created such as the sales role or marketing role. Individuals or groups of users

25. The MSDU contains data from the LLC and layers 3-7. A simple definition of MSDU is the data payload that contains the IP packet plus some LLC data.