CCIE Vocab
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 0% • Most missed: “With a routing update - or routing table entry - the portion of a route that def…”
CCIE Vocab
Time left 00:00
25 Questions

1. A protocol - defined in RFC 2865 - that defines how to perform authentication between an authenticator (for example - a router) and an authentication server that holds a list of usernames and passwords.

2. The MD5-encoded password defined by the enable secret command.

3. Weighted random early detection.

4. IP multicast address range from 224.0.0.0 through 239.255.255.255.

5. The number of beacons that governs how often multicast frames are sent over a wireless LAN.

6. With RIP - a per-route timer - which is reset and grows with the Invalid timer. When the Flush timer mark is reached (default 240 seconds) - the router removes the route from the routing table - and now accepts any other routes about the failed subne

7. Controls access to the Internet in public wireless LANs.

8. An 802.11 frame that access points or stations in ad hoc networks send periodically so that wireless stations can discover the presence of a wireless LAN and coordinate use of certain protocols - such as power-save mode.

9. A number between 1 and 64 -511 (public) and 64 -512 and 65 -535 (private) assigned to an AS for the purpose of identifying a specific BGP domain.

10. In MPLS - a term used to define a label that an LSR allocates and then advertises to neighboring routers. The label is considered "local" on the router that allocates and advertises the label.

11. A switch feature that examines incoming frames - comparing the source IP and MAC addresses to the DHCP snooping binding database - filtering frames whose addresses are not listed in the database for the incoming interface.

12. Point-to-Point Protocol.

13. Cell Loss Priority.

14. Permanent virtual circuit.

15. Enables a wireless client to securely roam between access points in the same subnet or between subnets with access point handoff times within 50 ms.

16. In the context of SNMP - the Set command is sent by an SNMP manager - to an agent - requesting that the agent set a single identified variable to the stated value. The main purpose is to allow remote configuration and remote operation - such as shutt

17. Defines a particular behavior for FTP regarding the establishment of data TCP connections. In active mode - the FTP client uses the FTP PORT command - over the FTP control connection - to tell the FTP server the port on which the client should be lis

18. A Frame Relay traffic shaping feature during which the shaping rate is reduced when the shaper notices congestion through the receipt of BECN or ForeSight messages.

19. A message sent by the multicast router - by default every 60 seconds - on each of its LAN interfaces to determine whether any host wants to receive multicast traffic for any group.

20. An exterior routing protocol designed to exchange prefix information between different autonomous systems. The information includes a rich set of characteristics called path attributes - which in turn allows for great flexibility regarding routing ch

21. A characterization of a BGP path attribute in which all BGP implementations must support and understand the attribute (well known) - and all BGP Updates must include the attribute (mandatory).

22. Service set identifier.

23. A neighbor state that signifies the other router has reached neighbor status - having passed the parameter check.

24. On a serial cable - the pin lead set by the DCE to imply a working link.

25. Controls the distribution of multicast traffic by checking the TTL values configured on the interfaces. It forwards the multicast packet only on those interfaces whose configured TTL value is less than or equal to the TTL value of the multicast packe

⚡ Recently practiced quizzes in this topic
Live quiz activity
Cybersecurity Practice Test: Phishing Data Privacy Basics Practice Test Cybersecurity Practice Test: Reverse Engineering Cybersecurity Practice Test: Social Networking Security Cybersecurity Practice Test: DoS and DDoS Cybersecurity Practice Test: Basics of Digital Privacy Cybersecurity Practice Test: Exploits and Exploitation
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.