Home > Electrical Engineering > Quizzes > Basic Electrical Engineering: DC Circuits
Basic Electrical Engineering: DC Circuits
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 38% Most missed: “In Norton's theorem Isc is__________”
Basic Electrical Engineering: DC Circuits
Time left 00:00
25 Questions

1. KVL is applied in ____________
2. Superposition theorem does not work for ________
3. Every____________ is a ____________ but every __________ is not a __________
4. Vth is found across the ____________ terminals of the network.
5. KCL is associated with_________
6. If there are 10 nodes in a circuit, how many equations do we get?
7. The sum of the voltages over any closed loop is equal to __________
8. Which of the following is also known as the dual of Norton's theorem?
9. How many nodes are taken as reference nodes in a nodal analysis?
10. In source transformation________
11. Which of the following is also known as the dual of Thevenin's theorem?
12. Can we use Thevenin's theorem on a circuit containing a BJT?
13. In superposition theorem, when we consider the effect of one current source, all the other current sources are ____________
14. A current source connected in parallel with a resistor can be converted to a?
15. If there are 3 10V sources connected in parallel then on source transformation__________
16. Batteries are generally connected in______
17. In a _________ circuit, the total resistance is greater than the largest resistance in the circuit.
18. The maximum power drawn from source depends on __________
19. Does maximum power transfer imply maximum efficiency?
20. Nodal analysis is generally used to determine_______
21. In a ____________ circuit, the total resistance is smaller than the smallest resistance in the circuit.
22. Nodal analysis can be applied for________
23. Mesh analysis employs the method of ___________
24. The maximum power is delivered to a circuit when source resistance is __________ load resistance.
25. KVL deals with the conservation of?