1. Kirchhoff s voltage law applies to circuits with

2. An ideal voltage source has

3. If resistance across LM in Fig. 2.30 is 15 ohms, the value of R is

4. The superposition theorem is applicable to

5. For a voltage source

6. Which of the following is not a nonlinear element ?

7. To determine the polarity of the voltage drop across a resistor, it is necessary to know

8. The circuit has resistors, capacitors and semi-conductor diodes. The circuit will be known as

9. Which of the following is a bilateral element ?

10. Application of Norton’s theorem to a circuit yields

11. Kirchhoff s law is applicable to

12. Thevenin resistance Rth is found

13. For high efficiency of transfer of power, internal resistance of the source should be

14. Which of the following is the passive element ?

15. In a series parallel circuit, any two resistances in the same current path must be in

16. The concept on which Superposition theorem is based is

17. A capacitor is generally a

18. Efficiency of power transfer when maximum transfer of power c xerosis

19. 'In any network containing more than one sources of e.m.f. the current in any branch is the algebraic sum of a number of individual fictitious currents (the number being equal to the number of sources of e.m.f.), each of which is due to separate action of each source of e.m.f., taken in order, when the remaining sources of e.m.f. are replaced by conductors, the resistances of which are equal to the internal resistances of the respective sources'. The above statement is associated with"

20. 'In any linear bilateral network, if a source of e.m.f. E in any branch produces a current I in any other branch, then same e.m.f. acting in the second branch would produce the same current / in the first branch'.The above statement is associated with

21. The circuit whose properties are same in either direction is known as

22. Kirchhoff s current law states that

23. Superposition theorem can be applied only to circuits having

24. A network which contains one or more than one source of e.m.f. is known as

25. For maximum transfer of power, internal resistance of the source should be