The cycle of evaporation and rain in nature can be assumed to be a kind of Carnot cycle. If ocean water instead of evaporation are boiled by the heat of Sun at a constant temperature of 100 deg C and the condensation of steam into water droplets within the clouds occur at constant temperature of -20 deg C. Find the thermal efficiency of Carnot cycle of nature?

Turbine Thermodynamics and Efficiency topics include: Basics of thermodynamics, carnot, rankine and reheat cycles, temperature and pressure effect on cycle efficiency, heat and steam rate, sterling cycle, ericsson cycle, intercooling, reheating and regeneration. Turbine efficiency is the ratio of the turbine's actual work output to the net input energy. It's also known as the power coefficient.  The efficiency of an ideal turbine would be 100%, meaning it would convert all input energy into output work without losing energy to heat or other forms. However, this is not possible due to... Show more

Turbine Thermodynamics and Efficiency topics include: Basics of thermodynamics, carnot, rankine and reheat cycles, temperature and pressure effect on cycle efficiency, heat and steam rate, sterling cycle, ericsson cycle, intercooling, reheating and regeneration.

Turbine efficiency is the ratio of the turbine's actual work output to the net input energy. It's also known as the power coefficient. 

The efficiency of an ideal turbine would be 100%, meaning it would convert all input energy into output work without losing energy to heat or other forms. However, this is not possible due to factors like friction and heat loss. 
The efficiency of a gas turbine is complicated to calculate because of the dynamic vapor conditions. These conditions depend on the type of fuel and atmospheric conditions. 

The overall balance equation for a gas turbine is:
Shaft Power: = Fuel Energy - Power Required for Compression - Exhaust Energy - Mechanical Losses 

The performance of the cycle can be evaluated using two parameters: the thermal efficiency and the work output. 
The efficiency can be expressed as:
η: = W / Q1
Q1: is the heat supplied to the cycle
W: is the work output 

In thermodynamics, the calculation of work done by a turbine also takes into account factors like temperature, pressure, and entropy. 

Related Test: Steam and Gas Turbines Practice Test: The Basics

Show less