Home > Food Science And Technology > Quizzes > Food Engineering Practice Test: Sedimentation and Centrifuge, Mixing, Size Reduction and Separation and Material Handling and Transportation
Food Engineering Practice Test: Sedimentation and Centrifuge, Mixing, Size Reduction and Separation and Material Handling and Transportation
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 81% Most missed: “Which of the following conditions show that a certain industrial mixer is the be…”
Sedimentation and centrifugation are used in food processing to separate solids and liquids.  Sedimentation is often used to separate dirt and debris from raw materials, crystals from their mother liquor, and dust or product particles from air streams.  Centrifugation uses the principles of sedimentation and separation to improve product quality and ensure consumer safety.  It can provide solid–liquid and liquid–liquid separations. For example, centrifugation can remove milk fat (cream) and clarify milk at the same time. It can also be used to treat oils, juices, and beers.   In food... Show more
Food Engineering Practice Test: Sedimentation and Centrifuge, Mixing, Size Reduction and Separation and Material Handling and Transportation
Time left 00:00
25 Questions

1. Statement 1: Belt conveyors cannot be used in the inclined position.

Statement 2: Screw conveyors can carry more amount of load compared to belt conveyors.
2. Statement 1: Bucket conveyors can be divided into close and spaced bucket conveyors.

Statement 2: Bucket conveyors can be divided into centrifugal and positive discharge bucket conveyors.
3. With respect to dipping oil emulsions, which of the following is true?
4. Which of the following food operation does NOT use the principle of size reduction for its operation?
5. Which of the following is NOT a reason to affect the effectiveness of a screen?
6. Statement 1: For calculating the minimum thickener area, the angle bisector method is used.

Statement 2: In the angle bisector method, the point obtained the curve and the corresponding time is the time when the solids enter the compression zone.
7. Which of the following is an application of sedimentation in the food industry?
8. Statement 1: The g-number is the ratio of the velocity in a centrifuge to that of the velocity in sedimentation.

Statement 2: The g-number is represented as Z.
9. Statement 1: Flat blade/curve blade/arrow head/vaned disc turbines are generally used for gas-liquid mixing.

Statement 2: Helical screw/ribbon mixer/gate anchor are generally used for solid-solid mixing.
10. Statement 1: For non-Newtonian fluids, another term called apparent viscosity is used as their viscosity changes with the change in the shear rate.

Statement 2: For non-Newtonian fluids, between the transition region, the power number for non-Newtonian fluids is slightly higher than that for Newtonian fluids.
11. Slat belts are made up of_____
12. Statement 1: Where Pg is power for a gassed system and Po is power for an ungassed system, Pg/Po is _____

Statement 2: Na stands for _____
13. Which of the following does the terminal velocity of a particle NOT depend on?
14. Gyratory screens are used when it is a continuous operation to be handled and the amount of material to be handled is very high.
15. Which of the following is NOT true with respect to size reduction?
16. The overall effectiveness of sieve equipment is the _____ of the effectiveness of the underflow and the overflow separately.
17. Statement 1: Chain drive rollers move faster than belt driven rollers.

Statement 2: Screw conveyors are used in the feeding of raw materials like wheat or chilly into the grinding unit to make a powder out of it.
18. The area of neutral zone, in a centrifuge is __________
19. Which of the following uses attrition?
20. Which of the following is true with respect to mixing operations in the food industry?
21. Statement 1: In a dairy industry, it is desired to obtain the cream from milk using a centrifuge. Which will stay in the center?

Statement 2: It is desired to have __________ for the above process.
22. Statement 1: In the transient zone, the power input depends on the density and viscosity of the fluid.

Statement 2: In the laminar zone, the power input depends on the density only. It is independent of the viscosity of the fluid.
23. Pneumatic conveying is done under which of the mentioned conditions?
24. Which of the following is true with respect to Carbonation?
25. Statement 1: Which mixture is used when one of the components is very less in quantity?

Statement 2: This mixer is used to mix items in savory or a snack item.