Home > General Studies (Hindi) > Quizzes > 25 Standards Every Inspector Should Know Course
25 Standards Every Inspector Should Know Course
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 73% • Most missed: “T/F:”
25 Standards Every Inspector Should Know Course
Time left 00:00
25 Questions

1. Any portion of a masonry chimney located in the interior of the building (such as in an attic space) must have a clearance of at least ________ from any combustibles.

2. The _________ and every sleeping room should have at least one operable emergency escape and rescue opening that opens directly into a public street, public alley, yard or court.

3. The only type of fixture trap permitted is a(n) ___-trap.

4. T/F: Glazing in railings is considered a hazardous location.

5. T/F: The door between an attached garage and a dwelling unit should be of solid wood not less than 2 inches thick.

6. _____ clearance is required from windows that do not open.

7. T/F: In general, there should be no openings in the ductwork installed in a garage area.

8. Air-admittance valves are ________-activated.

9. If particleboard is used as wall sheathing, the grade mark with Type _____ or _____ should be stamped on it.

10. Foundation anchor bolts should extend at least ____ inches into masonry or concrete.

11. Glass block is considered ________.

12. All FVIR water tanks have components in common, including the ___________.

13. To prevent walls and floors from shifting under lateral loads, anchor bolts or ________ attached to the foundation are required.

14. T/F: It is acceptable for a service panel to be located inside a clothes closet.

15. T/F: Air-admittance valves are permitted to vent fixtures installed at island structures in kitchens.

16. There should be at least ____-inch gypsum board applied on the garage side to separate the garage from the residence and its attic space.

17. T/F: A standpipe can serve as an indirect waste receptor.

18. T/F: Glazing in storm doors is considered a hazardous location.

19. The TPR valve should be located in the upper 6 inches of a hot water tank, where the _______ water is located.

20. In high-wind installations, each composition roof shingle should be held by at least _______ nails or staples.

21. An open vent pipe that passes through a roof should extend at least _____ inches above the roof.

22. T/F: The opening to an attic space that has any mechanical equipment located in it should be a maximum of 20 inches by 20 inches.

23. T/F: Glass in bi-fold closet doors is considered a hazardous location.

24. The upper edge of a masonry chimney cleanout should be at least ____ inches below the lowest inlet opening.

25. Open electrical service conductors and multi-conductor cables that are not installed in a raceway or provided with an approved overall outer jacket should have a clearance of at least _____ feet from the sides of doors, porches, decks, stairs, ladders, fire escapes and balconies, and from the sides and bottoms of operable windows.

⚡ Recently practiced quizzes in this topic
Live quiz activity
Objective GS (General Studies) in हिन्दी - Indian States & The Company Rajasthan GK Hindi - Fairs & Festivals Objective GS (General Studies) in हिन्दी - Indian Polity - Historical Background of Constitution Objective GS (General Studies) in हिन्दी - Indian Polity - Judiciary Rajasthan GK Hindi - Culture Objective GS in Hindi - General Geography - Air Pressure, Humidity & Air Movement Rajasthan GK Hindi - Energy Rajasthan GK Hindi - Tourism Rajasthan GK Hindi - Rajasthan Introduction Rajasthan GK Hindi - Rivers & Lakes
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.