Home > General Studies (Hindi) > Quizzes > How to Perform Residential Electrical Inspections Course
How to Perform Residential Electrical Inspections Course
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 70% Most missed: “How can you bond a remote distribution panel?”
How to Perform Residential Electrical Inspections Course
Time left 00:00
25 Questions

1. Which of the following should be reported as a problem with an electrical panel?

2. AFCI breakers made by ________ were subject to a recall notice.

3. AFCIs are required to protect _________ circuits.

4. Zinsco electrical panels are problematic due to __________.

5. What color will plastic conduit be if it is for electrical use?

6. For a 14-gauge copper wire, the maximum overcurrent protection rating is _____ amps.

7. Which of the following statements is true about 240-volt breakers?

8. Which of the following locations require fixed lighting?

9. The typical supply for a Square brand electric meter is a ______ amps.

10. GFCI receptacles can protect ____________ receptacles, if properly wired.

11. Upgrading to ___ fuses stops over-fusing.

12. A(n) __________________ cause of arc flashes when removing panel fronts is incorrect fasteners.

13. Are horizontally mounted face-up countertop receptacles allowed?

14. A split-bus electrical panel uses a double-pole breaker to ______________ the 120-volt circuits.

15. Most homes constructed between 1930 and _____________ originally had a 60-amp service.

16. How can you bond a remote distribution panel?

17. GFCI receptacles _________ only on 3-wire circuits.

18. Gas supply piping cannot be used as a ____________.

19. GFCI breakers have _____ conductors.

20. Which of the following should the inspector be wearing while evaluating electrical panels?

21. The ungrounded and grounding conductors can share a common bus __________.

22. The maximum breaker rating must _____ the allowable ampacity of the conductor.

23. Electrical panels do not have to be fully enclosed as long as no hole is bigger than _________.

24. The minimum conductor size for a ______-amp service is 4-awg copper or 2-awg aluminum.

25. Grounding gets rid of damage due to transient over-voltages caused by what?