Home > General Studies (Hindi) > Quizzes > Mechanics of Solids: Torsion in Shafts, Columns
Mechanics of Solids: Torsion in Shafts, Columns
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 13% Most missed: “Skimming float is ____________”
Mechanics of Solids: Torsion in Shafts, Columns
Time left 00:00
25 Questions

1. Stucco is a type of _________
2. Which of the following is also known as pulling force?
3. _________ is provided to reduce the kinetic energy of falling water in weir.
4. ________ is a measure of the strength of shaft in rotation.
5. __________ is provided for the easy movement of fish from upstream to downstream.
6. ____________ are provided to protect the land and property with is likely to be submerged.
7. Area of catchment is measured in ___________
8. The moment of inertia of a plane area with respect to an axis ____________ to the plane is called a polar moment of inertia.
9. ______ transfer the loads from beams or slabs to footings or foundations.
10. The hooks law is valid only for _________
11. __________ is provided to prevent the river from outflanking the work.
12. Calculate the torque which a shaft of 300 mm diameter can safely transmit, if the shear stress is 48 N / mm2.
13. A fine grained material is mostly ________
14. Torsional sectional modulus is also known as _________
15. Radius of gyration is denoted by _________
16. Which of the following plastering is widely adopted in rural areas?
17. The ultimate strength in flexure is known as modulus of ________
18. Skimming float is ____________
19. Which of the following is known as “under sluices”?
20. The above formula was coined by _____
21. Curtain walls are provided to increase ________
22. Trend of rainfall can be studied from _______
23. The relative change in position is called ______________
24. Doubly reinforced beams are provided when Mu _____ M.
25. What are the units of torsional rigidity?