Home > General Studies (Hindi) > Quizzes > OSHA Workplace Safety Standards and Compliance
OSHA Workplace Safety Standards and Compliance
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 0% Most missed: “Which of these conditions would require that synthetic slings be removed from se…”
OSHA workplace safety standards mandate that employers provide a hazard-free workplace, strictly following regulations for construction, general industry, maritime, and agriculture. Compliance requires implementing safety training, providing PPE, displaying official posters, and recording injuries. Key standards cover fall protection, electrical safety, chemical management, and emergency planning.  Key OSHA Standards and Requirements Fall Protection: Mandated for construction employees working at heights of six feet or more, utilizing guardrails, safety nets, or harnesses. Personal... Show more
OSHA Workplace Safety Standards and Compliance
Time left 00:00
25 Questions

1. What are the safety requirements for power tools?

2. What is the definition of Occupational Exposure under the BBP standard?

3. · When the entry cover into a Permit Required Confined Space (PRCS) is removed, the entry shall be __________________.

4. What is OSHA's mission?

5. Which of these conditions would require that synthetic slings be removed from service?

6. What is the purpose of OSHA Directives, including Enforcement and Compliance Directives (CPL)?

7. What does OSHA require powered industrial truck operators be trained on?

8. How often must the periodic inspections mandated by the Lockout / Tagout Standard be conducted?

9. When an unqualified person is working in an elevated position near overhead lines, the person and the longest conductive object he/she may contact cannot come closer than ____feet to any unguarded, energized overhead line with a voltage to ground 50kV or below.

10. What does OSHA's Lockout / Tagout standard cover?

11. What is the common simple method that is most often used to ensure that wheels for power abrasive grinders are safe to operate?

12. The grounded conductor shall be?

13. Not on test - Which of the following are the most common hazards associated with conveyors?

14. When must OSHA's Annual Summary of Occupational Injuries and Illness be posted?

15. OSHA's Process Safety Management of Highly hazardous Chemicals list how many specific toxic and reactive chemicals.

16. OSHA regulations require what specific type of assessment to select the proper personal protective equipment?

17. What does the term PASS mean in fire fighting?

18. A fire watch must be stationed in the area and maintained for at least ____ minutes after the welding operations have been completed in locations where a fire might develop.

19. In addition to the presentation of credentials, what are the components of the inspection process?

20. What are the required gap settings for tongue guards and work rest on abrasive wheel machinery?

21. What is the point of operation"?"

22. Portable jacks must be permanently marked with what information?

23. Would a railroad tank car containing 300 gallons of toluene be considered a permit required confined space?

24. When using compressed air to clean off equipment, the pressure must be reduced to less than 30 psi and then only with what protection?

25. When does the first day of a restricted workday case begin?