The Science of Fires
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 69% Most missed: “What are the characteristics of the Multipurpose dry chemical powder (class ABC …”
Fire is a rapid, self-sustaining chemical reaction (oxidation) that requires four components—fuel, oxygen, heat, and a chain reaction—collectively known as the fire tetrahedron. Removing any element causes the fire to extinguish. It is characterized by the release of light and heat.  The Four Components (Fire Tetrahedron): Fuel: Any combustible material (solid, liquid, or gas). Solid fuels undergo pyrolysis to release gases, while liquids undergo vaporization. Oxygen: Oxidizing agent; air typically contains ~21% oxygen, and at least 16% is needed for combustion. Heat: Energy source... Show more
The Science of Fires
Time left 00:00
25 Questions

1. Higher vapor pressures indicate _____, rather than _____?

2. Which fire class represents flammable liquids? Give examples and tell what kind of smoke immerses and why is it that type of smoke?

3. Why are metal fires difficult to extinguish?

4. What are the characteristics of the fire extinguishing agent called PKP or Purple K Powder (class BCD agent)?

5. Which fire class represents ordinary combustible materials? (such as wood, paper, cloth, and cardboard that leave an ash residue and burn with a whitish to grayish smoke)

6. _____ is intended to confine fires while occupants escape and firefighters attempt to extinguish the fire?

7. How are fire extinguishing agents classified? What are they typically classified as?

8. Explain the reactions between Water (Class A" agent) and the different types of fire extinguishing agent classes?"

9. Define what Removal of Oxygen is? Give an example?

10. Define what Dilution of Oxygen is?

11. Define Heat Removal?

12. _____ - partial pressure of the vapors produced at the surface of a liquid at a given temperature (i.e., 100 F)?

13. Explain the reactions between Carbon Dioxide (Class BC" agent) and the different types of fire extinguishing agent classes?"

14. If a wall, door, or other building component is rated for 2 hours of fire resistance...?

15. What types of materials present the hazard of spontaneous combustion?

16. _____ - the temperature at which a liquid produces sufficient vapors that, if a heat source is presented, they will ignite momentarily?

17. _____ smoke is the primary fire indicator?

18. ______ the process by which alkaline mixtures (i.e., potassium acetate, potassium citrate, or potassium carbonate) combine with fatty acids to create a soapy foam surface layer that contains vapors and extinguishes the fire?

19. Which fire detection system uses the presence of combustion gases as the primary fire indicator?

20. What are the characteristics of the fire extinguishing agent called Foam (class AB agent)?

21. A fire needs what 4 components to spread?

22. What are the characteristics of a Wet-Pipe Sprinkler System?

23. Normally, once the equipment is energized, the fire will cease or become a Class B or Class C fire.

24. Which fire class represents metal fires that burn brightly? What kind of smoke is given off by this fire?

25. Oxygen concentrations below ____% adversely affect humans, what should be done?