Advanced PLC Review
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 74% • Most missed: “_____ is the default communications option for a PanelView Plus terminal.”
Advanced PLC covers high-level industrial automation, focusing on sophisticated, state-based programming, advanced hardware (e.g., Allen-Bradley/RSLogix 5000), and integration with SCADA/DCS systems for complex control tasks. It emphasizes enhancing reliability, troubleshooting efficiency, and using advanced techniques like Function Block Diagrams (FBD) and Structured Text (ST).  Key aspects of advanced PLC reviews and training include: Programming Techniques: Moving beyond basic ladder logic to state-based, tag-based programming, and structured text. Hardware and Simulation: In-depth... Show more
Advanced PLC Review
Time left 00:00
25 Questions

1. The six basic components of most PLCs are the power supply, the input and output modules, the processors module, the programming device, and the ___________.

2. A PLC and PC are connected in a(n) ______________ network using a single Ethernet cable.

3. Two addresses are used for Ethernet communications: Media Access Control (MAC) and ______________________.

4. __________ is a network search utility that shows the layout of every network that has a driver configured in RSLinx.

5. _____ displays networks and devices in a similar manner to Windows Explorer.

6. A(n) __ is used to download hardware configurations and programs to a PLC.

7. _____ objects display information on the PanelView plus display that notifies the operator about the status of the machine or process.

8. Ethernet/IP uses the ___ (protocol) to produce a network suitable for use on automation and control level.

9. A PLC requires much less _____ than a hard wired relay panel that could do the same job.

10. Tags are _____ names given to PLC memory locations used to store information.

11. The IP address of a CompactLogix PLC that already has an IP address is viewed and edited using ______ communications software.

12. In a PLC program, arranging two XIC instructions in series is an example of a(n) _____ logic element.

13. _____ is the default communications option for a PanelView Plus terminal.

14. A() _______ is a file that contains a hardware configuration and control program.

15. Allen-Bradley _____ operator interface terminals are programmable operator stations that enable interaction between users and a PLC controlled system or process.

16. _____ objects appear on the PanelView's display but do not interact with a PLC's data tags.

17. A problem with identifying a controller's firmware revision by examining the hardware's _____________ is that it is often inaccessible once installed.

18. The _____ pushbutton changes the terminal's display to another assigned display when operated.

19. _____ are named according to their location, slot, and data type.

20. PanelView Plus applications are created in _____ using graphics and tags.

21. _______________ uses several protocols to convert data from its native format, such as a text message, into a format that can be sent and tracked from the source node to the destination node of a network.

22. The four languages used to program a CompactLogix PLC are sequential function chart, _____, function block diagram, and ladder logic.

23. When voltage is applied to input terminal Local:1:I.Data.0 of a PLC, a programmed XIC instruction with the same address will _____.

24. Five types of numbering systems are decimal, binary, BCD, octal, and _____.

25. The _____ instruction of a ladder logic network operates in a similar manner to a hard-wired output device.

⚡ Recently practiced quizzes in this topic
Live quiz activity
PLC Review Questions Basic PLC Programming Industrial Robotics and Digital Manufacturing Technician Practice Test: Operating Industrial Robots Industrial Robotics and Digital Manufacturing Technician Practice Test: Introduction to Welding Robot Industrial Robotics and Digital Manufacturing Technician Practice Test: Simulation Software Industrial Robotics and Digital Manufacturing Technician Practice Test: Safety and Maintenance Industrial Robotics and Digital Manufacturing Technician Practice Test: Performing Operations on Industrial Robots
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | OSHA Basics Quiz | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.