Speed reduction in a gear box is achieved using a worm and worm wheel. The worm wheel has 30 teeth and a pitch diameter of 210 mm. If the pressure angle of the worm is 20o, what is the axial pitch of the worm?

Toothed Gearing & Gear Trains topics include: Toothed gearing, gearing laws, gear trains and its types, spur gears, epicyclic gear trains torques, interference, contact path, standard proportions of gear system, bevel gears, worm and standard spur gears, reverted gears length of arc of a contact and its ratio. Toothed gears are used to transmit power and motion between shafts that rotate at a specific velocity ratio. They are also used as sliding gears for speed change mechanisms in gearboxes.  Here are some types of gears: Spur gears: These are cylindrical gears with teeth that are... Show more

Toothed Gearing & Gear Trains topics include: Toothed gearing, gearing laws, gear trains and its types, spur gears, epicyclic gear trains torques, interference, contact path, standard proportions of gear system, bevel gears, worm and standard spur gears, reverted gears length of arc of a contact and its ratio.

Toothed gears are used to transmit power and motion between shafts that rotate at a specific velocity ratio. They are also used as sliding gears for speed change mechanisms in gearboxes. 

Here are some types of gears:
Spur gears: These are cylindrical gears with teeth that are parallel to the shaft. They are used to transfer mechanical motion and control speed, power, and torque between shafts. Spur gears are easy to manufacture and can be used in a variety of applications, including speed increase or reduction, torque multiplication, and enhancing accuracy for positioning systems.
Bevel gears: These are conical wheels with straight teeth that are used for drive forms where shafts intersect at a certain angle. They are made of steel and have an engagement angle of 20°. 

Other types of gears include: Worm gears, Helical gears. 

A gear train is a mechanical system that consists of two or more gears mounted on a frame so that their teeth engage. Gears are toothed wheels that can be used to transmit motion and force. They can also be used to increase or decrease the speed and torque of a driven gear. 

Here are some basics of gear trains:
Speed ratio: The speed ratio of a gear train is defined by the ratio of the angular velocity of the input gear to the angular velocity of the output gear.
Gears: Gears are toothed parts that convey motion, alter the speed, or change direction. Two adjacent meshed gears will always rotate in opposite directions.

Here are some basic styles of gears:
Spur gear: Has a helix angle of 0°
Worm gear: Found in right angle gearboxes
Helical gear: An angle toothed gear
Bevel gear: Tend to have a lower ratio and run at a higher efficiency than worm gears

Here are some types of gear trains:
Simple gear trains: Use only two gears (a driver and a driven gear)
Compound gear trains: Use more than two gears on a single shaft for intricate speed control
Reverted gear trains: Where the driver and driven gear are on the same axis and are used in compact spaces 

Show less