Home > Motor Vehicle Mechanic > Quizzes > Motor Vehicle Mechanic Practice Test: Starting & Stopping System
Motor Vehicle Mechanic Practice Test: Starting & Stopping System
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 75% Most missed: “Why it is necessary to disengage the starter pinion from fly wheel ring gear onc…”
Motor Vehicle Mechanic Practice Test: Starting & Stopping System
Time left 00:00
25 Questions

1. Cycle is define as ---------------
2. Where the starter motor located?
3. What is the name of part marked as ‘X’ in the starting circuit?
4. What is the name of part marked as ‘X’ in the bendix type starting system?
5. Positive plate of a sponge lead cell is made with ---------------------------
6. The EMF OF a cell doesn’t depends upon -------------------
7. What is the type of starting system?
8. Who created the first nickel cadmium battery in 1899?
9. What is the working principle of alternator?
10. What is the advantage of series winding type starter motor?
11. If the area of the plate increases , then the capacity of a battery ----------------------
12. What causes no charge when engine is running?
13. What is the function of rotor assembly?
14. What will be the result of loose drive pulley in the alternator?
15. During charging process of a lead acid cell which one of the following gas evolve at cathode
16. What is name of the part marked as X in the armature?
17. Higher voltage can generated by ---------------------
18. What is the function of diodes?
19. What is the function of solenoid switch?
20. What is the purpose of slot provided in the laminated cylindrical iron core of stator assembly?
21. What is the name of part marked as ‘X’ in the armature winding?
22. Which one of the following is used for topping of the batter in lead acid cell ?
23. Which part of bendix drive starting system limit the turning of the sleeve on the armature shaft?
24. Activate material of lead acid cells are ----------N.M
25. What is the name of alternator part?