Home > Plumbing Certification > Quizzes > Plumber's Licensing Exam: Different Plumbing Codes and Abbreviations
Plumber's Licensing Exam: Different Plumbing Codes and Abbreviations
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 59% Most missed: “In which code(s) are mechanical vents allowed?”
Plumber's Licensing Exam: Different Plumbing Codes and Abbreviations
Time left 00:00
15 Questions

1. Concerning the regulations for shower drains: The UPC only allows a ____ drain for a shower (UPC Table 7–3); the IPC allows a 11/2-inch drain (IPC Table 709.2).
2. DWV copper tubing can be used for
3. In which code(s) are air admittance valves allowed?
4. The UPC has been adopted primarily in the
5. In both the UPC and the IPC, a vent stack carries
6. In which state are both the UPC and the IPC accepted as a part of the state building code.
7. In the _________, a deck-mounted air gap is required for dishwasher drains.
8. The abbreviation that designates the type of threads that are cut in pipes, which form a tapered thread used commonly in plumbing is
9. In both the UPC and the IPC, a vent stack carries
10. Hoar frost can close a plumbing vent when
11. A DFU is used
12. The smallest diameter fixture branch allowed for a lavatory in the UPC and the IPC is
13. UL is
14. The UPC has been adopted primarily in the
15. In a jurisdiction using the UPC in its entirety, a kitchen drain must