Home > Plumbing Certification > Quizzes > Plumber's Licensing Exam: Special Piping and Storage Systems
Plumber's Licensing Exam: Special Piping and Storage Systems
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 80% • Most missed: “The design of a medical gas system is the responsibility of the installer as lon…”

Note: Answers may vary based on whether the IPC or UPC is applicable.

Plumber's Licensing Exam: Special Piping and Storage Systems
Time left 00:00
15 Questions

1. The design of a medical gas system is the responsibility of the installer as long as an adequate supply of gas or adequate vacuum is available at each station outlet.
2. What else is needed after the installer pressure tests a medical gas system and the Authority Having Jurisdiction inspects the system before it can be put into operation?
3. In a medical vacuum system, the exhaust from the vacuum pumps must terminate
4. What special installation procedures must be used in rooms occupied by psychiatric patients?
5. Fittings for installation of medical gas systems must be cleaned and stored in airtight containers that have been purged with _________________________.
6. Medical gas piping systems must be pressure tested to _________ times the working pressure of the system.
7. The only material usable for medical gas systems is ________________________.
8. _______________ gas must be flowing through a medical gas system when brazing joints.
9. Specify two of the markings that must appear on piping to show that it is allowed to be used in a medical gas system.
10. In addition to approved copper tubing, what kind of piping can be used in a medical vacuum system?
11. The only material usable for medical gas systems is ________________________.
12. The best place to use as a chase for medical gas systems is an elevator shaft.
13. The best place to use as a chase for medical gas systems is an elevator shaft.
14. What is the purpose of the two pumps on a medical vacuum system?
15. On medical gas piping with a diameter of less than 21/2 in., all valves must be of the ___________ type.

⚡ Recently practiced quizzes in this topic
Live quiz activity
Plumber's Licensing Exam: Gas Piping Installations Plumbing Practice Test Plumber's Licensing Exam: Storm Drainage Plumbing Certification Building Utilities - Plumbing Basics Plumbing Study Guide 2 Plumber's Licensing Exam: Traps, Interceptors, and Separators Plumbing Study Guide Plumbing Vocab Plumbing Tools
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | OSHA Basics Quiz | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.