Home > CompTIA Security+ Certification > Quizzes > National Electrical Code 2023 Basics: Grounding and Bonding
National Electrical Code 2023 Basics: Grounding and Bonding
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 0% • Most missed: “Regulation that can be violated by neutral-to-ground connections downstream of a…”
NEC Article 250 covers grounding and bonding to ensure electrical safety by stabilizing voltage and providing a low-impedance path for fault current. Grounding connects the system to the earth, while Bonding links metallic parts for continuity. Proper grounding and bonding ensure overcurrent devices trip, protecting against shocks.  Key Grounding and Bonding Concepts: Grounding Electrode System (NEC 250.52): A reliable, direct connection to the earth, such as a ground rod, concrete-encased electrode (Ufer), or metal water pipe, must be used. Grounding Electrode Conductor (GEC): Connects... Show more
National Electrical Code 2023 Basics: Grounding and Bonding
Time left 00:00
25 Questions

1. Required for a metal water piping system in a building or structure supplied by a 400-ampere feeder with the largest ungrounded feeder conductor being 600 kcmil copper.

2. An enclosure that contains devices designed to protect the circuit from overcurrent conditions.

3. system neutral conductor

4. The section that requires the electrodes present at any building or structure served to be bonded together.

5. ground, grounded metal parts, and any equipment grounding conductor(s)

6. A system that does not have a direct connection to ground.

7. The equipment grounding conductor for PV output or source circuits can be no smaller than 10 AWG copper.

8. Wet-niche luminaires supplied by a flexible cord must have all exposed non-current-carrying metal parts grounded by an insulated copper equipment grounding conductor.

9. For one- or two-family dwellings, the primary protector bonding conductor or grounding electrode conductor shall be as short as practicable, and generally must not exceed 20' in length.

10. A metal underground water pipe that is in direct contact with the earth for 10' or more is a Code-recognized grounding electrode.

11. The only grounding electrode present for the building served by a 400-ampere feeder.

12. For sensitive electronic equipment, the voltage is 120 volts between ungrounded conductors and 60 volts from each ungrounded conductor to the neutral.

13. Where rigid metal conduit is used as the wiring method for circuits in hazardous locations, a minimum of 5 full threads must be fully engaged and made up wrenchtight where conduits enter explosion-proof equipment.

14. Electrical systems that are grounded shall be connected to earth to provide functions such as facilitating overcurrent protective device operation, limiting line surges or unintentional contact with lines of higher voltage, limiting the voltage imposed by lightning, and stabilizing voltages during normal operation.

15. Devices required for monitoring ground faults in ungrounded systems.

16. Are required to be grounded.

17. Copper alloy or equally substantial approved means

18. The minimum size required for an aluminum grounding electrode conductor or bonding conductor installed for a television antenna system or equipment is 8 AWG.

19. A method for minimizing potential differences and circulating currents.

20. Can be accomplished by interconnected fittings, metal-to-metal contact on common framing, or a solid copper conductor sized 8 AWG or larger.

21. When electrical systems or equipment are grounded, the ground (Earth) is part of the electrical circuit.

22. Permitted by 250.52(A) for use as grounding electrodes at a separate building or structure.

23. Sections 517.13(A) and 517.13(B) address grounding of receptacles and fixed electrical equipment in patient care spaces, with Section 250.118 addressing equipment grounding conductors.

24. A reference table used to size the system bonding jumper based on the size of the largest derived ungrounded phase conductor(s) or the total circular mil area of all conductors connected to any one ungrounded phase at the source.

25. The circuit conductors between the final overcurrent protective device protecting the circuit and the outlet(s)

⚡ Recently practiced quizzes in this topic
Live quiz activity
CompTIA Security+ Certification Exam CompTIA Cybersecurity Analyst Plus CySA+ CS0-001 Questions CompTIA Security+ SY0-601 Certification Exam Terms To Know Hardening Pentest+ CySA+ (CS0-002) Review Questions Physical Security Cybersecurity Assessment Test Virtualization (And Security) Overview of Security
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.