NOCTI Fashion Review
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 75% Most missed: “A sleeve constructed without a shoulder seam is called”
NOCTI Fashion Review
Time left 00:00
25 Questions

1. A garment should have three fittings. The final fitting would be After the garment has been completely

2. A garment sold for $92.15. the material cost was $34.35 and the time was 10 hours. What was the hourly rate?

3. When fitting a muslin toile, the straight of grain runs true vertical and the cross grain runs true horizontal. The term that best describes this characteristic is

4. A finish that will make cotton stronger and more lustrous is called

5. The bottom part of a collar is usually ___ than the top

6. When replacing a fly zipper

7. A piece of fabric is on grain when Lengthwise and crosswise threads are at right

8. To gain fullness in a pattern, a method that can be used is called

9. A piece of fabric is on grain when Lengthwise and crosswise threads are at right

10. What are lasers?

11. CAD/ CAM technology in apparel and textile industry tracks

12. The face of fabric is the ___ side

13. A piece of fabric cut on grain identical to the garment and used to finish edges such as necklines and sleeves is called

14. Which of the following is not a type of collar

15. Cotton is a/an ___ fiber

16. The top part of a pattern for a dress is called

17. Centered or slot , lapped and invisible are several forms of

18. A machine that loops the thread around the edge of the fabric is a/an ___ machine.

19. A square yard contains

20. What is a clutch, an ascot, fedora,

21. When gathering use a ___ stitch

22. Yarns that run in the same direction as the selvages are called ___ yarns

23. Venduese

24. How does computer technology improve the industry?

25. What is Style?