Home > Energy Engineering > Quizzes > Power Plant Engineering Practice Test: Hydroelectric Power Plant
Power Plant Engineering Practice Test: Hydroelectric Power Plant
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 84% Most missed: “The maximum efficiency of jet propulsion of a ship with inlet orifices at right …”
Hydroelectric Power Plant topics include: Pelton wheel turbine, kaplan, francis and deriaz turbines. A hydroelectric power plant uses the power of moving water to generate electricity. The word "hydro" comes from the Greek word for water.  Here's how hydroelectric power plants work: A dam is built across a large river to create a reservoir. A penstock is a large steel pipe that carries water from the reservoir to the turbine. As the water flows down through the penstock due to gravity, its potential energy is transformed into kinetic energy. The kinetic energy turns a turbine, which... Show more
Power Plant Engineering Practice Test: Hydroelectric Power Plant
Time left 00:00
25 Questions

1. Slip of a reciprocating pump is defined as the __________
2. In which turbine the pressure energy of water is first converted into kinetic energy by means of nozzle kept close to the runner?
3. A Pelton wheel working under a constant head and discharge, has maximum efficiency when the speed ratio is?
4. The pressure of water is atmospheric and remains constant while passing over the runner in __________
5. The speed of an imaginary turbine, identical with the given turbine, which will develop a unit power under a unit head, is known as?
6. For centrifugal pump impeller, what is the maximum value of the vane exit angle?
7. The specific speed from 160 to 500 r.p.m. of a centrifugal pump indicates that the pump is __________
8. Which of the following pump is generally used to pump highly viscous fluid?
9. The hydraulic efficiency of a reaction turbine is the ratio of __________
10. The maximum efficiency of jet propulsion of a ship with inlet orifices at right angles to the direction of motion of ship, will be?
11. A hydraulic coupling belongs to the category of __________
12. Power required to drive a centrifugal pump is directly proportional to __________ of its impeller.
13. The impeller of a centrifugal pump may have __________
14. Which of the following is an example of impulse turbine?
15. The ratio of quantity of liquid discharged per second from the pump to the quantity of liquid passing per second through the impeller is known as?
16. Which of the following hydraulic turbines has a construction given in diagram below?
What is runaway speed of the runner of Pelton wheel?"
17. What is the mechanical efficiency of an impulse turbine?
18. By fitting an air vessel to the reciprocating pump, there is always a saving of work done and subsequently saving of power. This saving in case of a single acting reciprocating pump is?
19. Which of the following turbine is preferred for 0 to 25 m head of water?
20. The cups at the periphery of the Pelton wheel are __________
21. The maximum number of jets, generally, employed in an impulse turbine without jet interference are __________
22. The working of which of the following hydraulic units is based on Pascal’s law?
23. Kinematic similarity is said to exist between the model and the prototype, if both of them __________
24. Which of the following pump is preferred for flood control and irrigation applications?
25. A Francis turbine is used when the available head of water is?