Fashion Design and Technology
Random

Click random to get a fresh chapter.

Important Interview Questions and Answers for Apparel Industry Jobs

Question 1. What is clothing?
Answer: Clothing is one of the three basic needs of human being. Clothing is used for covering human body or other bodies to fulfill or satisfy the requirements of those bodies with the object of protection, decoration and identification.

Question 2. What is Garment?
Answer: A garment is a piece of clothing.

Question 3. What is apparel?
Answer: Clothes of a particular type when they are being sold in a shop. Apparel can also include things like name tags, jewelry or other stuff you wear.

Question 4. Why are woolen garments used in cooler climate?
Answer: The general configuration of wool fibre is helical and this configuration works as a wall for passing of cold or warm.

Question 5. What is design or sketch?
Answer: In clothing industry design means determining the shape and cutting patterns of garments according to it.

Question 6. What id basic block or block pattern?
Answer: Block patterns are the main or basic patterns which are constructed with definite and standard body measurement, but they do not possess any style or extra attractiveness or any type of allowances.

Question 7. What is a pattern?
Answer: Pattern is the model of all components of garments on a hard paper board.

Question 8. Why pattern is produced?
Answer:
To make a set of templates of different components of garments.
To make a large amount of production at a time.
To minimize wastage and cost of garments.

Question 9. What is working pattern or production pattern?
Answer: These are made on the basic of block pattern or basic block. Each block pattern is drawn or sketched on the hard paper board with the help of pencil. Then the following allowances and positions are added-
Sewing allowance
Trimming allowance
CBL
CFL
Button attaching position
Button holing position
Plate etc.

Question 10. What is invoice?
Answer: It is one kind of documents which contains the information’s about selling items. Normally there are two types of invoice-
Proforma invoice- preliminary,
Commercial invoice-finally.

Question 11. Seam line/attaching point is marked by U or V notch? (yes/no)
Answer: Yes

Question 12. How grain line is indicated/mentioned in patterns?
Answer: By arrow mark.

Question 13. What is grain line?
Answer: It is the line, which is marked on the patterns of a garment and the line indicates the warp yarn, as a result, when the pattern is placed in the marking paper then the Grain line follow the warp yarn of fabric.

Question 14. Grain line of pattern must be parallel of the fabric? (yes/no)
Answer: Yes

Question 15. Define category?
Answer: In garments export and import business a definite type of garments is specified by a definite number which is called category.

Question 16. What is approved sample?
Answer: The sample which is approved by the buyer is called approved sample.

Question 17. What is counter sample?
Answer: The manufacturers produce several numbers of samples following the approved sample which is known as counter samples. They facility the bulk production or hung on production floor.

Question 18. What do you mean by allowance?
Answer: In case of garments making some additional measurements are added with standard body measurement which is termed as allowances. This allowances is 1cm or 1inch.there are two types of allowance-(I) Trimming allowance. (II) Sewing allowances.

Question 19. What is interlining?
Answer: A layer of fabric which is used between two layer of fabric to give the particular area desired shape and to enhance the strength of that particular position which is called interlining. e.g. collar, cuff.

Question 20.What are the types of interlining?
Answer:
Sewable interlining,
Fusible interlining.

Question 21. What do you mean by lining?
Answer: A layer of fabric which is used in the inner side of garments to increase the comfort-ability of the garments which is called lining. e.g. suits, coats, ladies and babies wear.

Question 22. What do you mean by FDI?
Answer: FDI= Foreign direct investment. These types of investment directly come from foreign country.

Question 23. What is overlocking or neatening?
Answer: The sewing process of cutting edge of the fabric. So that the slack yarn cannot be opened.

Question 24. What is seaming?
Answer: The attaching procedure of different components of garments.

Question 25. What is stitch?
Answer: The unit of sewing or seam.

Question 26. What is seam?
Answer: The line of sewing of one or more than one layers of fabric/the line of joining of fabric.

Question 27. What do you mean by trimmings?
Answer: Beside fabric the components which are needed to make a complete garments termed as trimmings. e.g. Button, sewing thread, lining, interning etc.
You may also like: Different Types of Trims Used in Garments

Question 28. What is ticket number?
Answer: It indicates the coarseness or fineness of a sewing thread.

Question 29. What is L/C?
Answer: L/C means letter of credit. It is one kind of agreement between buyer and seller. Very frequently asked question in garments job interview.

Question 30. What is pattern grading?
Answer: Grading means the stepwise increase or decrease of a master pattern piece to create large or small size. Grading alters the overall size of a design but not its general shape and appearance. If buyer requires different sizes, we would have to grade the dimension. It may be S.L, X.L and XXL.

Question 31. What are the method of grading?
Answer: Grading can be apply two method – (I) manual method, (II) computerized method.

Question 32. Marker as a guideline for cutting? (yes/no)
Answer: Yes.

Question 33. What is back taking?
Answer: During sewing we need to start or end it prior to 1cm or after 1cm respectively to secure the sewing end. This is termed as back tacking.

Question 34. What is bar tacking?
Answer: We continue sewing for several times within a vary short distance to increase the load or strength of that particular portion which is termed as bar taking.e.g- edge of pocket, belt loop, Fly piece etc.

Question 35. What is blind stitch?
Answer: A particular type of stitch which is not visible from the face side of the garments.

Question 36. What do you mean by C.B.L and C.F.L?
Answer: C.B.L= center back line, C.F.L= center front line

Question 37. What are disposable garments?
Answer: The garments which are used for one time only called disposable garments. e.g. Medical garments.

Question 38. What do you mean by Flap?
Answer: It’s the part of pocket which covers the pocket opening.

Question 39. What is marker?
Answer: Marker is a thin paper which contain all necessary pattern pieces for all sized for a particular style of garments. it’s a representation or drawing of the arrangement of the identified materials. It is a basic question for apparel jobs interview.

Question 40. Fabric width and length must be higher than the marker width and length? (yes/no)
Answer: Yes.

Question 41. Grain line should be parallel to the warp direction in a woven fabric or the Wales in a knitted fabric? (true/false)
Answer: True

Question 42. What is formula of marker efficiency?
Answer: Marker efficiency= total area of pattern pieces in a marker/total area of marker × 100%

Question 43. The less the fabric wastage, the higher the marker efficiency?(true/false)
Answer: True.

Question 44. The more the marker length, the higher the marker efficiency? (True/false)
Answer: True.

Question 45. What do you mean by garments size?
Answer: The size of garments can be expressed by two methods-
Alphabetical expression e.g. S, M, L, XL, XXL
Numerical expression e.g. 38, 39, 40, 41, 42 (in cm or in inch)

Question 46. Write down the feature of T-shirt?
Answer:
Casual tops,
Narrow neck line,
Usually short sleeve,
No collar

Question 47. Write down the feature of polo shirt?
Answer: (I) Tops, (II) short/long sleeve, (III) collar, (IV) short button placket or neck opening.

Question 48. How can you divide all garments?
Answer: All types of garments can be divided mainly two groups – (I) Tops part, (II) Bottom part.

Question 49. Write down the feature of pull oven / sweater?
Answer: (I) Warm shirt, (II) Long sleeve, (III) Waist band, (IV) Pull on over head.

Question 50. Write down the feature of Tank-loop?
Answer: (I) Sleeve less pullover, (II) Used over a shirt (III) Warm shirt (IV) Waist band, (V) Pull on over head.

Question 51. Write down the feature of cardigan?
Answer: (I) Open front, (II) Fastened with a zip or button, (III) Waist band.

Question 52. What do you mean by CAD?
Answer: CAD means computer aided design: In apparel industry CAD systems are mainly used for garments design, pattern preparation, pattern grading and marker marking.

Question 53. What do you mean by CAM?
Answer: CAM means computer aided manufacturing. It includes computerized sewing machines, fabric spreading machines, cutting systems.

Question 54. Write some important meaning?
Answer:
CM= Cost of making
CMT= Cost of making with trimmings
FOB= Freight on boat","& F= Cost and freight
CIF= cost, insurance and freight
L/C= letter of credit
You may also like: List of Incoterms Used in Apparel Merchandising Business

Question 55. What is cloth spreading/laying?
Answer: To spread cloth as determined by needed quantity as per marking/ the smooth laying out of fabric in superimposed layer of specified length.

Question 56. What do you mean by fabric cutting?
Answer: To cut the cloth according to marker of patterns for sewing.

Question 57. What are the methods of fabric cutting?
Answer: (A) Manual method
Scissor
Round knife
Band knife
Straight knife
Die cutting
Notcher & -Drill (B) Computerized method
Straight knife cutting
Water jet cutting
Leaser beam cutting
Plasma torch cutting

Question 58. What do you know about fusible interlining?
Answer: The interlining which is attaching to the garments component by the application of temperature and pressure is called fusible interlining

Question 59. How fusible interlining is manufactured?
Answer: By using a resin coating of thermoplastic materials on a piece of fabric.

Question 60. For symmetrical fabric marker efficiency is high and less efficiency for asymmetrical fabric? (True/false)
Answer: True.

Question 61. The more large patterns and less small patterns reduce marker efficiency? (True/false)
Answer: True.

Question 62. For more small patterns, marker efficiency will be increased? (True/false)
Answer: True.

Question 63. What do you know about symmetrical fabric?
Answer: Fabric which can retain the same appearance in case of turning in 180° angle called symmetrical fabric. e.g. solid dyed fabric.

Question 64. What do you know about the asymmetrical fabric?
Answer: Asymmetrical fabric is those which can not retain the same appearance while turning in 180° angle. E.g. pile fabric, brushed fabric etc.

Question 65. What are the methods of marker making?
Answer:
Manual,
Computerized.

Question 66. What are the wastage of marker?
Answer: (I) Inside wastage (II) Outside wastage
Ends of ply losses (2-4) inch
Loss of fabric ends
Selvedge losses
Purchase losses

Question 67. What is sample?
Answer: The garment which is needed for bulk production is called sample garment.

Question 68. What is sewing?
Answer: The process of joining of fabric by the use of needle and sewing thread is called sewing.

Question 69. What are the basic components of sewing?
Answer:
Needle
Throat plate
Pressure foot
Feed dogs
Sewing thread and fabric.

Question 70. Write some name of sewing defects?
Answer:
Seam pucker
Broken or open stitch
Staggered stitch
Slipped or skipped stitch
Vertical stitch density.

Question 71. What do you mean by seam puckering?
Answer: Stitching with unwanted gathering.

Question 72. What do you mean by pressing and Finishing?
Answer: The process by which the unwanted crease and winkles are removed from the garments and the outlook of the garments is improved as well.

Question 73. Which iron is used for industrial purposes?
Answer: Steam irons.

Question 74. What do you know about lings?
Answer: Lings is the measuring unit of button diameter. To measure the outer diameter of button we use lings number. 1 ling = 1/40 inch = 0.025 inch = 0.636 mm

Question 75. How many types of label?
Answer: There are mainly three types of label
Main label,
Size label,
Care label.
The all other of label are called sub label.

Question 76. What do you know about motif?
Answer: The special component which is attached outside of the garment for decorative purpose called motif. e.g. company name, trade mark or other symbols can be written on the motif.

Question 77. What do you know about dart and pleat ?
Answer:
Dart = part of cloth is folded and stitched to slenderize it
A pleat is a type of fold formed by doubling fabric back upon itself and securing it in place or the pleat shows the form being folded and stitched.

Question 78. How many types of woven fabric?
Answer: Three types – (I) yarn dyed (II) solid dyed(s/ d) (III) Denim

Question 79. Desizing is mandatory or obvious before washing (True/False)
Answer: True.

Question 80. Why hot ash is necessary?
Answer: To clean the desize chemicals (introduction to cold water re-solidify the fat and wax)

Question 81. Why M:L is important?
Answer: Without m:l we can not determine the required amount of dyes, chemicals and water during dyeing, washing and other wet processing. That’s why m:l is important.

Question 82. What is the mechanism of producing fading effect in garments manufacturing?
Answer: Three process of fading mechanism –
Chemical action.
Mechanical action
Biological action.

Question 83. How many types of mechanical abrasion in garments washing?
Answer: Three types –
Garment to garment.
Garment to m/c
Garment to solid material (e.g. stone)

Question 84. How many types of chemical action in garment washing?
Answer: Three types-
Regular(Bleach wash)
Irregular(Acid wash)
Local(p.p.spray, p.p.sponge)

Question 85. What is the factor depends on action of washing?
Answer:
Time
Temperature
Mechanical abrasion
Chemical action

Question 86. What do you mean by costing and pricing/?
Answer:
Costing = Total consumption of garments without profit
Pricing = costing with profit.

Question 87. What do you know about back to back L/C opening?
Answer: For purchasing fabric and accessories against main L/C.

Question 88. What is lead time in garments?
Answer: Time start from L/C opening or order receive to garments delivery is called lead time.
Lead time — local market = 45 days
Foreign market = 90-120 days

Question 89. What is stock lot?
Answer: When goods are made for buyer but not possible to shipping as a result goods are stain at store. This goods are called stock lot .

Question 90. How many parts of jacket?
Answer: Three parts-
Upper part is called shell
Inner part is called lining
Middle part is called interlining.

Question 91. Write down the other commercial name of interlining?
Answer: Padding / wedding/ Bedding / polyfil.

Question 92. What types of garments are made from feather?
Answer: Overcoats, jackets, pillow, blanket etc.

Question 93. What types of feather are used for making garments?
Answer: Duck chest feathers.

Question 94. What do you mean by quality?
Answer: Quality is the difference between the products or It is the goodness or badness in a product or the feather of a product which satisfy customers or end users.

Question 95. What do you mean by label?
Answer: Label is an attached component of garment on which important information regarding the garment are written or printed.

Question 96. What do you mean by WWSC and RSWD?
Answer:
WWSC = wash with similar color
RSWD = Re shape whilst damp.

Question 97. Which inspection system widely used in garment industry?
Answer: 4-points system.

Question 98. What do you mean by TAP and AQL?
Answer:
TAP = Total acceptable product in a lot
AQL = Acceptable quality limit.

Question 99. What do you mean by core spun thread/yarn?
Answer: This thread /yarn has continuous filament polyester wrapped in cotton fibres.

Question 100. What do you mean by OE & CE zipper?
Answer:
OE zipper = open end zipper – use in jacket
CE zipper = closed end zipper – use in baggage.

Question 101. If 40 or more than 40 defects are present in 100 square yards then the fabric is considered as rejected in four-point system (True/false)?
Answer: True.

Question 102. What is the name of first garments industry in Bangladesh?
Answer: REAZ garments.

Question 103. What do you mean by garments final inspection?
Answer: Garments final inspection is to take decision whether the lot will be passed for shipment or it will be rejected.

Question 104. What are the different types of sampling inspection of garments?
Answer:
Without inspection,
100% inspection,
Spot inspection,
Arbitary inspection,
Acceptance inspection.

Question 105. Write down the section of shirt making?
Answer:
Collar section,
Cuff section,
Body section.

Question 106. What do you mean by PD, WR, WP, and TC?
Answer: PD= Plain dyed, WR= Water repellent, WP= Water proof, TC= Tetron & cotton, SD= solid dyed, YD= Yarn dyed.

Question 107. What is pattern?
Answer: The pieces of thick paper are required in the form necessary to make or style of garments is called pattern.

Question 108. What do you mean by marking?
Answer: Drawing as patterns on the as per style.

Question 109. What is consumption?
Answer: Needed quantity of cloth as per dz according to marker.

Question 110. What do you mean by assortment?
Answer: To determine the quantity of garments according to size and colour.

Question 111. What types of style of collar?
Answer:
One-piece (Bande d) collar,
Two-piece (bande d) collar,
Sport open (no bende d) collar.

Question 112. How many types of cuff according to style?
Answer: Four types —
Notched,
Squared, Rounded,
Pointed.

Question 113. How many types of cuff according to construction?
Answer: Two types—
One-piece cuff (The cuff which includes both front & back in one piece of cloth),
Two-piece cuff (two piece of cloth).

Question 114. Write down the types of front of a shirt?
Answer: (I) Plain, (II) Top center, (III) French front.

Question 115. How many types of sleeve?
Answer: (I) Long genbol, (II) Sleeve placket, (III) Hemmed sleeve.

Question 116. How many types of yoke?
Answer:
One-piece plain yoke (yoke and back are one piece of cloth),
Two-piece single yoke (yoke is separated from the back but yoke is one piece)
Two-piece double yoke (yoke is separated from the back but yoke is two piece of yokes)

Question 117. How many types of pocket style?
Answer: (I) plain, (II) Hexagon, (III) Rounded, (IV) squared, (V) Hemmed.

Question 118. How many types of bottom style of a shirt?
Answer: (I) Straight bottom, (II) Tailed bottom.

Question 119. What are the styles or types of packing and folding of shirt?
Answer:
Stand up (collar is folded to remain at 90° angle from the floor level)
Semi stand up (collar is folded to remain at 45° angle from the floor level)
Flat pack (collar is laid to the floor level at 0° angle)
Hanger pack (collar is folded for a hanger).

Question 120. What are the styles of shirt?
Answer: (I) Basic/regular, (II) Casual/Irregular, (III) Sport shirt, (IV) Blouse

Question 121. What do you mean by numbering in garments?
Answer: This process is to put a number on each part of a garment after cutting. So that the same numbers of each part might be combined at the time of sewing.

Question 122. What is sorting?
Answer: This process is to sort by size and color after cutting.

Question 123. Write down the attention point when marking
Answer:
Jumping & bias should not occur
Position marking
Must fit the end of the net (one side) line
Must check the quantity whether all the parts are marked as directed.

Question 124. When dies cutting is used?
Answer: For interlining cutting

Question 125. What is inlay/sewing allowance?
Answer: The fabric which is kept excess of the seam line at the time of sewing is called inlay/sewing allowance.

Question 126. Inlay is sewing allowance but sewing allowance is not inlay? (Yes/No)
Answer: Yes.

Question 127. What do you mean by Gusset (Front facing)?
Answer: The part which is folded into the inside of the front. This is two types—
Upper front gusset,
Lower front gusset.

Question 128. What do you know about inlay (sewing allowance)?
Answer: The part which is folded into the inside during sewing.

Question 129. What is back stitching?
Answer: It is stitching to back after finishing the stitch length; it is normally 3-5 stitches.

Question 130. What is error part?
Answer: When left and right are attached being interchanged with each other or both right or left are attached in case of cuffs and sleeves is called error part.

Question 131. Stitching and sewing, which is visible and invisible?
Answer:
Stitching—visible
Sewing—invisible

Question 132. What is double stitching?
Answer: The stitching which has two lines keeping constant distance is called double stitching.

Question 133. What do you know about slip out?
Answer: When the interlocking stitching stitches do not lock with each other along the sewing line then it is called slip out.

Question 134. What do you mean by floating?
Answer: Few stitches, which are not passed through the cloth of proper interval during sewing is known as floating.

Question 135. Write down the classification of assortment/packing?
Answer:
Solid size, solid color,
Solid size, assort color, Assort size, solid color,
Assort size, assort color.

Question 136. What do you mean by Y-shirt?
Answer: Basic shirt/regular shirt/Dress shirt.

Question 137. What do you mean by casual/irregular shirt?
Answer: Various types of style.

Question 138. What do you mean by sport shirt?
Answer: The shirt which is sporty and needs no neck tie.

Question 139. What are the function of clothing?
Answer: 1. Protection 2. Decoration 3. Identification

Question 140. What is the requirement of clothing?
Answer: 1. Suitability, 2. Appearance, 3. Comfort, 4. Aftercare, 5. stability

Question 141. How can we difference between a ladies shirt and a Gents shirt?
Answer: Buttons are on the opposite side to that of gent’s shirt,
Ladies shirt: Upper front part is right side.
Gents shirt: Upper front part is left side.
Ladies pant: Fly piece is right side.
Gents pant: fly piece is left side.

Question 142. What is E-Textiles?
Answer: E-textile also known as electronic textiles are fabrics that enable computing, digital components and electronics to be embedded in them. The emphasis of e-textile will be on creating a women textile with embedded copper which will provide the usual wear comfort and at the same time it will have a circuit with a few chips sunning at few megahertz.
Example: In the field of medical prevention and rehabilitation it becomes highly necessary to continuously monitor the patient’s health condition by keeping sensing devices close to the body and e-textile can successfully accomplish senior functionality.

Question 143. What is the reason for clothing?
Answer:
Modesty
Protection against adverse climate conditions
Adornment
Identification
Aristocratic reason

Question 144. Size of Human?
Answer:
Men-(i). Short- 5’ 3” to 5’ 7” (ii). Regular- 5’8” to 6’ (iii). Tall- above 6’
Women-(i). Short 4’11” to 5’3” (ii). 5’4” to 5’7” (iii). Tall above 5’7”

Question 145. What is Production pattern/Garments pattern?
Answer: When necessary allowances are added to the working patterns, then they are called production pattern.

Question 146. What is Working pattern?
Answer: The patterns which are made with net dimension of a particular style called working patterns.

Question 147. What methods are used to make Block patterns?
Answer: i. Flat method ii. Modeling method

Question 148. What are the methods of pattern grading?
Answer: (i). Manual grading, (ii). Computer aided grading.

Question 149. What is half part grading?
Answer: If the increasing or decreasing is done in every sides of a pattern, then it is called half part grading.

Question 149. What is ¼th part grading?
Answer: If the increasing or decreasing is done in either lengthwise or width wise or in any two sides of a pattern then it is called ¼th part grading.

Question 150. What is C.B.L (Center back line)?
Answer: Middle point of back neck up to the bottom end in the back part of a shirt.

Question 151. What is C.F.L (Center front line)?
Answer: Line from the top button to the bottom end in the face side of a shirt.

Question 152. What is collar stand or collar band?
Answer: It’s the part of a collar in which collar stands in upward direction. Collar stands in upward direction.

Question 153. What is cuff?
Answer: It is the end point of sleeve of a shirt laying around the wrist.

Question 154. What is Ticket number?
Answer: It indicates the coarseness or fineness of a sewing thread. e.g. 3/60, 2/80 etc.

Question 155. What is Hemming?
Answer: The process of sewing of an edge or border on a piece of cloth, especially a finished edge, as for a garment or curtain, made by folding an edge under and stitching it down. e.g. Bottom edge of a shirt.

Question 156. What is lead-time?
Answer: The time interval between the initiation and the completion of a production process.

Question 157. How design can be developed?
Answer:
Sketching (Two-dimension method): Usually developed on paper
Modeling (Three-dimension method): Usually developed dummy or live model
Computer aided design (CAD): Usually developed using design related software.

Question 158. T-shirt Feature.
Answer:
Refers as casual
Garments with narrow neckline,
Garments with short or long sleeves,
No collar/Cuff, and
Usually made of cotton.

Question 159. Polo-shirt feature.
Answer:
Used to cover the upper body part (Tops),
Garments with short/long sleeves,
Garments with collar and cuffs,
Short button placket or short chest opening, and
Made of either 100% cotton or CVC or PC.

Question 160. Tank Top feature.
Answer:
It is a sleeveless pull over,
It is used over a shirt,
Used as warm shirt,
Garments with waist band, and
It is put on overhead.

Question 161. Pull over/Sweater feature.
Answer:
Used as warm shirts,
Garments with long sleeves,
Garments with waist band, and
Put on overhead.

Question 162. Cardigan feature.
Answer:
Open front and fastened with a zipper or button,
Garments with waist band,
Used as warm shirts, and
Usually made of wool/acrylic.

Question 163. Shirt feature.
Answer:
Upper-body garment with a collar, cuffs and pocket,
A full vertical opening and fastened with buttons,
With short or long sleeves, and
Men’s shirt having lower front part at right hand side and for women it is exactly opposite.

Question 164. Sportswear feature.
Answer:
Auto motorcycle racing wear
Bike wear
Golf apparel
Ski wear (winter garments)
Sports jersey and track tops
Sports shorts and trousers
Swim wear and beach wear
Training and jogging wear

Question 165. What is the function of CAD in apparel industries?
Answer:
Garments design.
Pattern design & pattern preparation.
Pattern grading
Marker making

Question 166. What is the function of CAM in apparel industries?
Answer:
Fabric spreading.
Cutting systems.
Mover systems.
Sewing systems.

Question 167. What is grading?
Answer: Grading means the step wise increase or decrease of a master pattern piece to create large or small size. Grading alters the overall size of a design but not it̕s general shape & appearance.

Question 168. What is the main objective of marker?
Answer:
To minimize the fabric wastage
To improve the quality of garments.

Question 169. What are the main product are produced in garments Industry in Bangladesh?
Answer: Woven shirt, T-shirt, trouser, jacket, jogging shuts, sweaters, jersey etc.

Question 170. How much currency earn from garments sector in Bangladesh every year?
Answer: Above 75%.

Question 171. What is quota?
Answer: Kind of agreement between the exporter country where importer country mentions a specific number of garments.

Question 172. When established garments industry in Bangladesh?
Answer: In 1960,” REAZ” garments.

Question 173. What is the basic difference between sewing and stitching?
Answer:
Sewing is Invisible
Stitching is Visible

Question 174. What is the difference between the yarn and thread?
Answer:
Yarn = (i) Yarn is used for producing fabrics (Knit & Woven). (ii) Normally it is single ply.
Thread = (i) Thread is used for garments sewing. (ii) It is normally two or three or four plies.

Question 175. What measurement unit used in America and Europe.
Answer: America use=Inch, Europe use=Centimeter (cm).

Question 176. What are the sections of sewing used for making a shirt?
Answer: There are three sections-
Collar section
Cuff section
Body section

Question 177. What type of woven fabric?
Answer: 1. Yarn dyed, 2. Solid dyed, 3. Denim.

Question 178. What is Line Balancing?
Answer: Line Balancing is the allocation of sewing machines according to style and design of garment. It depends on, what type of garments we have to produce. This question is frequently asked in apparel jobs interview.

Question 179. What is Compliance?
Answer: Compliance means comply something’s that is yield to the wishes another. The main aim of compliance is to ensuring the all labour rights and facilities according to the Buyer code of conduct.

Question 180. What are the different types of order?
Answer:
FOB (Free on boat) order
FOA (Free on air) order","& F (Cost and freight) order
CIF (Cost, insurance and freight) order
CIFC (Cost, insurance, freight and commission) order
CMT (Cutting, making and trimmings) order
CM (Cost of making) order
TT (Telephonic transfer) order
Subcontract order
Exchange order.

Question 181. What do you mean by FOB (Free on boat) order?
Answer: This is the export term of delivery and price quotation. The sellers send the goods for export and delivers them on boat (the ship). The risk is passed from seller to buyer when the goods are loaded in the ship at the port of departure. The buyer payes the freight charges. The seller does not include the freight charge with his costing.

Question 182. What do you mean by FOA (Free on air) order?
Answer: The seller delivers the goods to the air carrier at the airport of departure. The buyer bears the risk from that moment and payes the air transport cost. The seller bears the cost of materials and making, does not include air freight.

Question 183. What do you mean by C & F (Cost and freight) order?
Answer: The sellers send the goods for export, payes the freight charge and deliver them on boat (the ship). The risk is passes to the buyer when the goods are left the port of departure.

Question 184. What do you mean by CIF (Cost, insurance and freight) order?
Answer: This is identical to the C&F term except that in addition, the seller ensures (pay the insurance bill) the goods against loss and damage at his own cost.

Question 185. What do you mean by CIFC (Cost, insurance, freight and commission) order?
Answer: At this type of order, the seller includes the cost of insurance, freight and commission for local buying house.

Question 186. What do you mean by CMT (Cutting, making and trimmings) order?
Answer: In this case, the buyer fixes the rate of CMT with the factory. So, the seller does not add the price of fabric with his costing, but at L/C buyer gives all money to the factory. The factory collects only CMT money from the bank. Balance money return to the fabric supplier. This ordering system is following the tailoring shop.

Question 187. What do you mean by CM (Cost of making) order?
Answer: In this case, the buyer fixes the rate of CM only with the factory. So, the seller does not add the price of fabric and trimmings with his costing, but at L/C buyer gives all money to the factory. The factory collects only CM money from the bank. Balance money return to the fabric and accessories supplier.

Question 188. What do you mean by TT (Telephonic transfer) order?
Answer: When order quantity is very small and need urgent delivery, in that case, buyer gives purchase contract instead of L/C and sends money to seller bank by TT. After getting money, the seller sends the goods to buyer.

Question 189. What do you mean by Subcontract order?
Answer: It is indirect order, the order is received by another factory and when it is not possible for that factory to complete the production within the time, in that case they share the order with other factory by giving subcontract. The subcontract factory only gets the CM charge by local money from the order taker.

Question 190. What do you mean by Exchange order?
Answer: In this case, the buyer did not pay any money against buying garments from Bangladesh. Instead of money, they are giving another goods or products, which is surplus in their country but we need it very much. This type of business is very rare. They use L/C for doing this type of business.

Question 191. What do you mean by Proforma invoice?
Answer: Proforma invoice is temporary commercial invoice, which is send by exporter to importer. It helps to open a letter of credit (L/C) in favor of exporter by importer. It helps the foreign buyer to obtain an import license if it is necessary.

Question 192. What do you mean by commercial invoice?
Answer: Commercial invoice is the final invoice and basic document. It contains all the details like name & address of importer and exporter, description of goods, quantity, rate, value of goods, details of shipment.

Question 193. What do you mean by letter of credit (L/C)?
Answer: It is important document, which is used for doing the business, where Bank is responsible for payment in favor of sellers. It is a means/instrument for opening a credit (L/C) in favor of exporter by importer to make payment on fulfillment of conditions within given time. It is a very common question in apparel jobs interview.

Question 194. What is Tag gun?
Answer: It is used for attaching the Hang tag, Price ticket etc.

Question 195. What do you mean by Bill of Exchange?
Answer: A Bill of Exchange is a legal document and order in writing, requesting the drawee (Factory) to pay within the specified time. The drawer (supplier), drawee and payee (Bank) are involved in this transaction. The Bill of Exchange also known as draft, can be right draft or wsanee draft.

Question 196. What do you mean by Bill of Landing?
Answer: Bill of Landing is a document issued by the shipping company acknowledging that the goods have been shipped on board and undertaking that the goods as received will be delivered to the consignee (Buyer).
When the export contract is CIF, then the exporter makes payment of the freight and gets “freight paid” Bill of Landing. On the other hand, if the contract is FOB, the freight has to be paid by the importer. In that case, the shipping company will issue a “freight collect” Bill of Landing.

Question 197. What do you mean by Shipping Bill?
Answer: The shipping bill is the main documents required by the customs authority for allowing shipment. It contains description of export goods and other particulars as defined in The Sea Customs Act, name of the vessel in which goods are to be shipped, Country of Destination etc.

Question 198. What do you mean by Shipping Order?
Answer: It is a document issued by the shipping line intimating the shipper (Exporter) about the reservation of space for shipment of cargo through a particular vessel from a specified port and on a specified date.

Question 199. What do you mean by Vehicle Ticket/Cart Ticket?
Answer: It is a gate pass for port gate. It is prepared for admittance of cargo through the port gate. It contains details of cargo for export, the shipper name, cart, lorry number, gate number, marks on package, quantity and description.

Question 200. What is pattern engineering?
Answer: It is the engineering idea which is applied at the time of marking for reducing the consumption of fabric. In this case consumption is reduced by overlapping the patterns or reducing the patterns or dividing the patterns into two parts like cuff, side pocket of pant etc.

Question 201. What is Style?
Answer: A style is a type of product that has one or more specific feature or characteristics that distinguish it and make it different from other product of the same type. e.g. A crew neck is one style of neck line and a turtle neck is another style.

Question 202. What is Design?
Answer: Within a specific style there can be many variations in trimmings, texture, decoration or other details like embroidery, screen printing etc. The individual interpretation or variations of the same styles are called design. One style can be many designs.

Question 203. What is Fashion?
Answer: Fashion means consumer acceptance, the prevailing or accepted style in dress or personal decoration established or adopted during a particular time or season. The most widely recognize fashion authority, the late Dr. Paul-H-Nystrom (1928) define fashion is similar words as “Nothing more or less than the prevailing style at any given time”.

Question 204. What do you mean by D/P (Document of payment)?
Answer: Under this method, the goods are shipped and documents are sent to the importer through the banking channel. The documents are handed over to the clearing (C&F) agent for clearing the goods from the port.

Question 205. What do you mean by D/A (Documents in Acceptance)?
Answer: Under this method of payment terms, importer takes delivery of the documents on acceptance of a claim in the form of Bill of Exchange from the bank through whom documents are sent after goods are shipped. In this method there is risk of non-acceptance of bill and non-payment due to bankruptcy.

Question 206. What are the processes for fixation of export prices?
Answer: There are three processes-
FOB (Free on board)","& F (Cost & Freight) (FOB cost+ Freight = C & F) and
CIF (Cost, insurance & freight) (C&F cost + Insurance = CIF)

Question 207. What is consumption?
Answer: In the garments trade, consumption means quantity of raw materials with a view to determine the price of a garment. In order to calculate the above quantity how much fabric, sewing thread, button, label, zipper and other accessories are required to produce a garment up to the exporting is called consumption.

Question 208. How many types of accessories?
Answer: Two types-
Visible accessories e.g. button, sewing thread etc
Invisible accessories e.g. interlining

Question 209. What do you know about synthetic thread/yarn?
Answer: This is large group of thread/yarn made mainly from nylon, polyester, rayon and polyamide filaments or fibres.