Home > IT Networking > Quizzes > Computer Networks: Wired LANs - Ethernet MCQs
Computer Networks: Wired LANs - Ethernet MCQs
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 34% Most missed: “In gigabit Ethernet three or more stations are connected by”
Computer Networks: Wired LANs - Ethernet MCQs
Time left 00:00
25 Questions

1. In half duplex mode of MAC sublayer the stations are connected via
2. In 10Base2, the cable is
3. 10Base5 is a
4. NIC stand for
5. The preamble is actually added at the
6. Logic Link Control (LLC) defines a
7. CRC field is used to show the
8. NIC provides an Ethernet station with physical address of
9. 100BaseFX is used for the encoding of
10. The Logic Link Control provides one single data link control protocol for all IEEE
11. The block encoding increases the bit rate from
12. The terms that control the flow and errors in full duplex switched Ethernet is called
13. In multicast the relationship between the sender and receiver is
14. The maximum length of 10GBase-L in gigabit Ethernet implementation is
15. Preamble contains
16. By using fast Ethernet two stations are connected via
17. In gigabit Ethernet three or more stations are connected by
18. By using bridge, the collision is
19. In the full duplex mode of gigabit Ethernet, there is no
20. The term that is used to raise the bandwidth and separate collision domains are called
21. Round trip time and time required to send the jam sequence is called the
22. Media access control is the sub layer of
23. The half duplex mode of gigabit Ethernet approach uses
24. Acknowledgments of the frames must be implemented at the
25. The sublayer of data link layer that frames the data received from upper layer is called