Salvage of Defective Castings topics include: Casting affecting factors, defects classification and salvaging techniques. Salvaging techniques use waste from casting processes to create useful products. These techniques include welding, brazing, and other operations. Minor defects in castings can be economically salvaged, but major defects cannot. Major defects can lead to the rejection of the casting and a total loss of production. Salvaging operations can be avoided by properly designing and working the casting system. Salvaging techniques use electrodes that are similar to the base... Show more Salvage of Defective Castings topics include: Casting affecting factors, defects classification and salvaging techniques. Salvaging techniques use waste from casting processes to create useful products. These techniques include welding, brazing, and other operations. Minor defects in castings can be economically salvaged, but major defects cannot. Major defects can lead to the rejection of the casting and a total loss of production. Salvaging operations can be avoided by properly designing and working the casting system. Salvaging techniques use electrodes that are similar to the base composition of the casting. For example, here are some tips for welding cast aluminum: Prepare the weld area by removing any defects and oxide layers with a brush or solvent. Preheat the area to improve welding results. The usual range is 212–572°F (100–300°C). Use a weld rod that matches the chemistry of the casting or an approved substitute. Dress the weld back to the part contour after welding. Heat treat the casting after welding. Heat treatment eliminates residual stress and ensures that mechanical properties are met. Show less
Salvage of Defective Castings topics include: Casting affecting factors, defects classification and salvaging techniques.
Salvaging techniques use waste from casting processes to create useful products. These techniques include welding, brazing, and other operations.
Minor defects in castings can be economically salvaged, but major defects cannot. Major defects can lead to the rejection of the casting and a total loss of production. Salvaging operations can be avoided by properly designing and working the casting system.
Salvaging techniques use electrodes that are similar to the base composition of the casting.
For example, here are some tips for welding cast aluminum: Prepare the weld area by removing any defects and oxide layers with a brush or solvent. Preheat the area to improve welding results. The usual range is 212–572°F (100–300°C). Use a weld rod that matches the chemistry of the casting or an approved substitute. Dress the weld back to the part contour after welding. Heat treat the casting after welding. Heat treatment eliminates residual stress and ensures that mechanical properties are met.
Join 4M+ learners. Unlock unlimited quizzes, wrong-answer tracking, flashcards + reminders, study guides, and 1-on-1 challenges.