Home > Mechanical Engineering > Quizzes > All The Useful Production Engineer Interview Test
All The Useful Production Engineer Interview Test
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 50% • Most missed: “The cutting tool in a milling machine is mounted on:”
All The Useful Production Engineer Interview Test
Time left 00:00
25 Questions

1. The machining of titanium is difficult due to:
2. Side rake angle of a single point cutting tool is the angle:
3. If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the pressure type of locator used is:
4. The different spindle speeds on a lathe form:
5. Crater wear occurs mainly on the:
6. The correct sequence of tool materials in increasing order of their ability to retain their hot hardness is:
7. The work or surface speed for cylindrical grinding varies from
8. Gear lapping is an operation:
9. Grinding wheels should be tested for balance:
10. A fine grained grinding wheel is used to grind hard materials.
11. The rake angle required to machine brass by high speed steel tool is:
12. A left hand tool on a lathe cuts most efficiently when it travels.
13. The velocity of tool relative to the work piece is known as cutting velocity.
14. When the cutting edge of the tool is dull, then during machining:
15. The average cutting speed for turning brass with a high speed steel tool is:
16. The silicon carbide abrasive is chiefly used for grinding:
17. In up milling, the thickness of chip is:
18. The tool made of cemented carbide wear out faster at:
19. In order to prevent tool from rubbing the work __________ on tools are provided.
20. Cemented carbide tool tips are produced by powder metallurgy.
21. Which of the following statement is wrong about ultra-sonic machining?
22. Cast iron during machining produces
23. A single point thread cutting tool should ideally have:
24. In oblique cutting system, the maximum chip thickness occurs at the middle.
25. In orthogonal cutting system, the maximum chip thickness occurs at the middle.

⚡ Recently practiced quizzes in this topic
Live quiz activity
Thermodynamics: First Law of Thermodynamics Manufacturing Engineering Practice Test: Metal Cutting - Mechanics of Cutting Mechanical Engineering Mechanical Engineering Practice Test: Refrigeration Mechanical Engineering Practice Test: Production Technology ME203 Final Exam - Materials and Materials Processing Mechanical Engineering Practice Questions Production Planning and Control: Introduction Design of Mechanical Systems Production Planning and Control: Scheduling And Sequencing
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | OSHA Basics Quiz | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.