Home > Mechanical Engineering > Quizzes > ASVAB Auto and Shop Information Revision
ASVAB Auto and Shop Information Revision
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 0% • Most missed: “These files are used for finishing work and sharpening blades”
ASVAB Auto and Shop Information Revision
Time left 00:00
25 Questions

1. Components of Emission-control systems

2. A heavy weight that is suspended from a line; it indicates vertical trueness

3. The rear wheels push the car. The drive shaft extends from the transmission to the rear axle.

4. A tool used for setting and transferring angles. The handle is usually made of wood or plastic and is connected to a metal blade with a thumbscrew or wing nut. The blade pivots and can be locked at any angle by loosening or tightening the thumbscrew.

5. A wood-cutting chisel that has a heavy, strong blade meant for rough work

6. These nails have heads that are made to fit flush with or slightly below the surface of the wood

7. These wrenches are closed. (Some have open-end jaws on one end but this type of wrench on the other)

8. A fastening tool that uses staples as fasteners.

9. This sends an electric current back to the battery to keep the battery charged and also powers the other electronic gadgets on your car when the engine is running

10. The ___ system takes the 12-volt current from the battery, steps it up to about 20,000 volts, and then sends the current to the spark plugs

11. 3 types of wrenches that come in set, standard sizes (either in inches or in mm); they are not interchangeable

12. The shaft on which the wheels revolve

13. A wood-cutting chisel that has a narrow blade made for chiseling out the narrow mortises in joints

14. All wheels push and pull the car at the same time. The drive shaft extends from the transmission to both axles.

15. A clamping tool use when a vise wont work. These connect only to the items being worked with. (e.g. C-clamps)

16. A rotating shaft and a switch within the distributer that routes the current through wires to the spark plugs (ignition system, older cars)

17. A vise that holds round trip or pipes

18. A vise that has large, rough jaws that keep the material form slipping

19. ___ is mechanically connected to the carburetor OR ___ is electronically connected to the EFI computer

20. Round pieces of steel shaped in a spiral, to create holes; attached to a drill

21. These nails have 2 heads, one lower than the other, and a point on the other end. The nail is driven to the lower head but can be pulled out of the material because of the remaining higher head. Used for temporary construction that will be taken apart

22. 3 types of Nails

23. What are the 3 components of the engine's cooling system?

24. 2 types of Chisel

25. This valve opens as the connecting rod pulls the piston down, drawing the gas/air mix into the cylinder

⚡ Recently practiced quizzes in this topic
Live quiz activity
Thermodynamics: First Law of Thermodynamics Manufacturing Engineering Practice Test: Metal Cutting - Mechanics of Cutting Mechanical Engineering Mechanical Engineering Practice Test: Refrigeration Mechanical Engineering Practice Test: Production Technology ME203 Final Exam - Materials and Materials Processing Mechanical Engineering Practice Questions Production Planning and Control: Introduction Design of Mechanical Systems Production Planning and Control: Scheduling And Sequencing
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.