Home > Mechanical Engineering > Quizzes > Professional Home Inspector Exam NHIE / TREC
Professional Home Inspector Exam NHIE / TREC
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 80% • Most missed: “The inspector is not required to:”

For National Home Inspector Examination (NHIE)  / TREC (Texas Professional Real Estate Inspector) training.

Professional Home Inspector Exam NHIE / TREC
Time left 00:00
25 Questions

1. Real Estate Recovery Fund - Payments against an inspector based on judgments cannot exceed ___ until the inspector has reimbursed the fund for all the money paid

2. What two structural components would be tied together with hurricane ties?

3. An inspector cannot repair replace or upgrade a property that he/she has inspected for

4. Safety glazing is required where

5. Inspection Report must be delivered within ___ of the inspection unless otherwise agreed upon by the parties.

6. Inspectors are not required to inspect the whirlpool jets or ports

7. Clothes Dryer vent should be installed at least ___ feet from building opening

8. Vermiculite Insulation

9. _____ is the maximum height of a stairway riser.

10. The report can be changed to include circles of brackets instead of check boxes:

11. The balusters of a deck less than 30 inches off the ground must have no more than 4 inches between them:

12. Fire suppression: Sprinklers shall have a temperature rating of not less than ___ degrees F and not more than ___ degrees F

13. High Efficiency furnaces:

14. If you are found guilty of inspecting a property without a license, what would be your consequences?

15. Pool: Maximum vertical clearance between grade and the bottom of the barrier shall be__?

16. A stud in a non-load bearing wall may be cut or notched by percent.

17. Must provide proof of Professional Liability Insurance of

18. The minimum hearth extension on the side of a fireplace with a 6 square foot opening and a firebox depth of 24 inches is _____ inches.

19. The inspector is not required to report: Anything that is not accessible.

20. Fees (535.210) The Commission shall charge and collect the following fees for renewal of a license in a timely manner:

21. Any problems that in the inspector's opinion would be a health/safety issue or major cost to the client, should be reported to the client:

22. When new insulation is placed directly over old in the attic, what is the correct way to place / handle Kraft paper on new insulation?

23. The maximum length of a dryer vent is _____ feet.

24. The inspector is not required to enter a crawl space if the width of the access opening is less than:

25. If release mechanism is located less then ____ from bottom of the gate, the release mechanism and openings shall: 1. Be located on the pool side of the gate and at least 3' below the top of the gate, and 2. The gate and barrier shall have no opening larger then ½' within 18' of the release mechanism.

⚡ Recently practiced quizzes in this topic
Live quiz activity
Thermodynamics: First Law of Thermodynamics Manufacturing Engineering Practice Test: Metal Cutting - Mechanics of Cutting Mechanical Engineering Mechanical Engineering Practice Test: Refrigeration Mechanical Engineering Practice Test: Production Technology ME203 Final Exam - Materials and Materials Processing Mechanical Engineering Practice Questions Production Planning and Control: Introduction Design of Mechanical Systems Production Planning and Control: Scheduling And Sequencing
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.