Home > Auto / Motor Mechanic > Quizzes > Automobile Engineering: Final Drive and Differential
Automobile Engineering: Final Drive and Differential
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 40% • Most missed: “The front axle of a car has pivot centers 1.3 m apart. The angle of inside lock …”
Automobile Engineering: Final Drive and Differential
Time left 00:00
25 Questions

1. What is a condition called when the vehicle will try to move away from its normal direction and to keep it on the right path there is need to steer a little?
2. What is called the cornering force over the slip angle?
3. What is the name of the angle through which the wheel has to turn to sustain the side force?
4. In the hydraulic braking system, the movement of the pistons in the wheel cylinder is transmitted to the brake shoes by
5. In the power assisted type of brake the bellows applies force to the master cylinder piston
6. What is the angle between the steering axis and the vertical in the plane of the wheel?
7. In a vacuum suspended unit, when the brakes are on, the piston or diaphragm has on both sides of it
8. Brake efficiency is a term which denotes
9. More often, the condition that draws attention to trouble in the differential is
10. If the car is moving on the level road at a speed of 50 km/h has a wheelbase 4 m, a distance of C.G. from ground 800 mm and distance from rear wheels is 1.2 m. Coefficient of friction is 0.8. What is the retardation if the brakes are applied to all wheels?
11. In a vacuum type servo-assisted brake system, vacuum is available in …….. is made use of
12. What is the purpose of the reciprocating ball type steering gear?
13. In jeeps we use
14. In a differential with a gear ratio of 4 : 1 the drive pinion would revolve four times to cause the ring gear to rotate
15. The metering valve is used to proportion the braking effect between the front and the rear axle.
16. As a rule when comparing the front and rear wheel cylinder pistons it will be found that the pistons in thefront wheel cylinders are
17. What is the angle between the vertical when the top of the wheel slants outward?
18. In a disc brake, which component provides the pad-to-disc adjustment?
19. The most widely used brakes are operated
20. On a straight road, the ring gear
21. To correct heavy toe contact on ring gear teeth, move the
22. Bleeding of brakes means
23. In the multiplier type of brake, the diaphragm acts directly on the hydraulic piston in the
24. In the atmospheric suspended system the brakes are applied when
25. If the front of the front wheels is inside and rear of front wheels are apart when the vehicle is at rest, then the configuration is called?

⚡ Recently practiced quizzes in this topic
Live quiz activity
ASE A9 Light Vehicle Diesel Engines Test Automobile Engineering: Suspension System Automobile Engineering: Automotive Electrical System ASE A5 Brake Systems Practice Test Automobile Engineering Practice Test: Transmission System - Clutches, Gear Box, Universal Joints and Differential Motor Mechanic Exam SkillsUSA Automotive Quizbowl IC Engine Practice Test: Electronic Injection Systems Auto Mechanics Tools Automechanics
 
❤ If you liked Fatskills, consider supporting us by checking out The Life Manuals You Never Got.

🌈  Our mission is to help improve your scores in any subject and exam withonline quizzes, practice tests, study guides, & advice for students. Since 2018.
About | Explore | User Guide | Topics | Subjects | Doubt Solver | Career Aptitude Test | Answers | Free Tools | OSHA Basics Quiz | What Should We Know?
Privacy | Terms |
Without work one finishes nothing. - Ralph Waldo Emerson
© 2026 Fatskills.com

All trademarks, logos and brand names are the property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.