Home > Auto / Motor Mechanic > Quizzes > NOCTI Auto Body Review
NOCTI Auto Body Review
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 77% Most missed: “A Sae Bolt Head Has 3 Slashes Or Raised Marks. These Marks Indicate A ___ Bolt.”
NOCTI Auto Body Review
Time left 00:00
25 Questions

1. Structural Adhesive Joints Disturbed By Primary Or Secondary Damage

2. Apply Weld-Through Primers

3. Crush Zones Make A Car Safer In A Collision Because They

4. Which Of The Following Is A Flat Surface Parallel To The Underbody Of The Vehicle At Some Fixed Distance From The Underbody

5. When The Bottoms Of A Car's Wheels Are Closer Together Than The Tops, The Car Is Said To Have

6. Damage That Occurs At The Point Of Impact Is Called

7. Apply A Sealer Over The Old Finish

8. The Term 'R & I' Means

9. The Cost Of A Repair Is $1450.00 For Parts And $2689.75 For Labor. With 7 Percent Sales Tax Added To The Parts, What Is The Total Cost?

10. Anti-Spatter Compound Is Used During Mig Welding To

11. Bare Metal, Moisture (Electrolyte) And ___ Are Needed For Corrosion To Occur

12. A Four-Door Vehicle Was Involved In A Frontal Impact. Adjust The _____Panel Assembly First

13. To Lighten A Paint Color,

14. The Most Accurate Way Of Determining A Vehicle's Factory Color Is By

15. Chip Resistant Coatings Are ____ Than Conventional Primers

16. Plastic Filler Must Be Mixed On A ____ Surface

17. A/An ___ Wrench Provides The Safest Grip On A Fastener

18. When Putting Out A Fire Involving Oily Rages, Use A ____ Fire Extinguisher

19. Another Name For The Cartridge Filter Respirator Is

20. A Second Coat Of Basecoat Is Applied When The First Coat

21. The Basic Starting Requirement For Any Effective Repair Process Is A ____ Metal Surface.

22. The Most Critical Step In Straightening A Damaged Area Is

23. Federal Guidelines Concerning The Safety Of ____ Are Issued By Osha

24. When Making A Vertical Butt Weld, The Weld Must Be Started From The

25. When Trying To Locate The Cause Of Wind Noise Or A Water Leak Near A Door, The Technician Should Check The Condition Of The Weather Stripping And The