Home > Business Skills > Quizzes > PLC Review Questions
PLC Review Questions
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 0% Most missed: “The memory space of a POC can be divided according to_____ and ______memory”

Related:

Basic PLC Programming

Introduction to PLC

Advanced PLC Review 

PLC Review Questions
Time left 00:00
25 Questions

1. Standard programming language used to develop a series of instructions that direct the PLC to execute actions is

2. The input image table file is changed to reflect the current status of input devices during the program scan phase of operation

3. What is the identifying number in the model number that established the modules are compatible with the Allen - Bradley SLC - 500 family

4. A parity bit

5. sequential control process

6. Volatile memory

7. Discrete devices

8. The_____Instruction sets the bit to one when the wrong becomes true, and retains its state when the wrong loses continuity or a power cycle occurs

9. One disadvantage of modular I/O is it's lack of flexibility

10. What would not be classified as a data file

11. Address

12. The programming device must be connected to the controller to run the program

13. Single ended application

14. Architecture

15. Input ON/OFF Delay (response time)

16. Analog modules can be either voltage sensing or current sensing

17. Inrush Current

18. What is the file extension for a RSLogix project

19. hardwired logic

20. The memory space of a POC can be divided according to_____ and ______memory

21. The datafile portion of memory stores:

22. The advantage of using a sensor that uses voltage...

23. Medium

24. The programmed latching relay instruction is retentive that is if the relay is latched it will unlatch if power is lost and then restored

25. Control management application