Home > CompTIA A+ Exam > Quizzes > Aircraft Design Practice Test: Thrust-Weight Ratio and Wing Loading
Aircraft Design Practice Test: Thrust-Weight Ratio and Wing Loading
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 0% Most missed: “A typical jet airliner has cruise thrust to weight ratio of 0.5. Determine at wh…”
Thrust-to-weight ratio (T/W) is a dimensionless ratio that indicates the performance of a vehicle propelled by a jet engine, propeller engine, or rocket. Wing loading (W/S) is the ratio of an aircraft's weight to its wing area.  Thrust-to-weight ratio is calculated by dividing the thrust of an airplane by its weight. Wing loading is calculated by dividing the mass of a plane or bird by the total area of its wings' upper surface.  Thrust-to-weight ratio is directly proportional to an aircraft's acceleration. An aircraft with a high thrust-to-weight ratio has high acceleration and excess... Show more
Aircraft Design Practice Test: Thrust-Weight Ratio and Wing Loading
Time left 00:00
25 Questions

1. Power available for prop will vary with density.
2. A jet aircraft has maximum lift to drag as 12. Find the value of the thrust loading at the cruise.
3. A jet fighter aircraft is flying with maximum Mach number of 2.0. What will be the thrust loading of the fighter?
4. Power loading of prop driven aircraft is ______
5. Jet aircraft with CD=0.01+0.02CL2 is performing loiter. Find wing loading for maximum loiter if, AR=8.5, e=0.7 and dynamic pressure is 25Pa.
6. For jet aircraft, thrust loading is greater than the climb gradient.
7. A prop driven A/C has BHP/W as 0.08. If density ratio is 0.2 and take off lift coefficient is 3 then find take-off parameter for the aircraft. Given wing loading W/s = 35.
8. For estimated value of the thrust loading, we got three different values of wing loading. As a designer typically which wing loading should be considered?
9. What is thrust matching?
10. An aircraft is to be designed to have max lift coefficient as 2.8 and at q=10Pa. If maximum load factor n=5 then, what will be the stall speed?
11. A civil A/C has maximum lift coefficient of 3. If wing loading is 120 then, find approach speed of the aircraft. Consider sea-level density.
12. As a designer I want to reduce the empty weight of my aircraft. Therefore I will ______
13. Consider thrust is given as 120 N of force then, find the value of thrust in terms of pound of force.
14. An A/C is flying with thrust loading at take-off is 0.9. If thrust at take-off and cruse is equal then, determine the thrust loading during cruise.
15. Thrust to weight ratio of all the aircrafts is same.
16. Higher value of thrust loading indicates ____
17. Low wing loading will provide ___________
18. A designer is designing an aircraft which has climb gradient of 1.5 and has drag of 20N. If it weighs 220kg then, determine thrust to weight ratio?
19. Thrust loading during flight does not remain constant as _____
20. Determine wing loading for civil aircraft if lift-off speed is 80m/s and maximum lift coefficient is 2.8.
21. Design lift coefficient is determined by wing loading.
22. Thrust loading is defined as ____________
23. A twin turbo prop is flying with power loading of 12. What will be the maximum velocity?
24. An aircraft is cruising with lift coefficient of 2.5 and thrust loading of 0.6. Find drag coefficient of the aircraft.
25. Which of the following is correct for a jet aircraft take-off parameter (TOP)?