Home > CompTIA A+ Exam > Quizzes > Highway Engineering Practice Test: Traffic Engineering
Highway Engineering Practice Test: Traffic Engineering
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 57% Most missed: “Which of the following roads are congested during peak hours?”
Traffic Engineering topics incude: Traffic engineering, traffic characteristics, traffic engineering studies and analysis, traffic flow, traffic regulation and control, traffic intersections design, parking facility design, pedestrian facilties, highway lighting, traffic planning and management. Traffic engineering is a branch of civil engineering that involves studying traffic patterns and developing strategies to improve safety and efficiency. It is a subdiscipline of transportation engineering that addresses the planning, design, and operation of streets and highways.  Traffic... Show more
Highway Engineering Practice Test: Traffic Engineering
Time left 00:00
25 Questions

1. The best type of interchange can be provided with __________
2. If an additional pavement is provided for lane change, then that intersection is called __________
3. What is the first stage in traffic engineering studies?
4. The basic objective of traffic engineering is to achieve ___________
5. Which of the following method is more accurate for traffic analysis?
6. The maximum jam density occurs at __________
7. If the number of cycles in trial cycle method is 20, for traffic of 170 on one road and 160 on other road, then calculate the total green time in sec.
8. If the acceleration of the vehicle is 6.17m/sec2 then the average skid resistance is?
9. The traffic volume is usually expressed in __________
10. Which of the following is a controlled type of pedestrian crossing?
11. If the angle of merging is low, then the relative speed will be __________
12. How many types of traffic speed studies are conducted?
13. The hearing, visibility and reaction time are covered in which type of factors?
14. Which of the following roads are congested during peak hours?
15. The place allotted particularly for only parking is called __________
16. The stability of a vehicle is influenced by ___________
17. If the distance of a vehicle moved is 25m and the observed travel time is 15 sec then space mean speed is?
18. The clearance time is indicated by __________
19. In 90 degree parking the length of kerb is 25m, the parking spaces are __________
20. The traffic survey is conducted during ___________
21. The capacity of an uncontrolled intersection is __________
22. The 5 minute count at a traffic junction is 15 find the hourly count?
23. The specifications for road signs are specified by __________
24. The minimum radius for rotary recommended by IRC is?
25. The motor vehicle act was revised in __________