Home > Construction Industry > Quizzes > Building & Construction Practice Test: Floors and Flooring
Building & Construction Practice Test: Floors and Flooring
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 74% Most missed: “In PVC flooring, time taken by the adhesive to set before the tiles are laid is …”
A floor is the bottom surface of a room or vehicle. Flooring is the general term for the permanent covering of a floor, or the process of laying flooring material.  Flooring can provide a uniform walking surface and has many benefits, such as: Structural support Resistance to moisture, heat, and sound A surface finish that may contribute to the look, feel, and acoustics of a space  When choosing flooring, you can consider things like: Traffic, Durability, Room size, Adaptability, Maintenance requirements.  Here are some types of flooring: Hardwood Engineered wood Laminate... Show more
Building & Construction Practice Test: Floors and Flooring
Time left 00:00
25 Questions

1. In timber flooring, the spacing between the sleeper walls is not more than __________
2. Which of the following precautions is not correct while constructing brick jack arch floors?
3. In the figure given below, A represents __________
A represents flagstone in flagstone flooring in particular sizes
4. Wooden joists provided in single joist timber floors are called as __________
5. Which of the following types of flooring is a decorative flooring?
6. The minimum thickness of the granolithic finish, when laid over a hardened surface, is __________
7. In simple reinforced cement concrete slab flooring, it is important to provide reinforcement in both the directions when the length of the room is _________ times its width.
8. Which of the following is not an element of triple joists timber flooring?
9. R.C.C stands for ___________
10. _____________ flooring is known as the composition flooring or jointless flooring.
11. The exposed term surfaces of floors are termed as the ____________
12. R.C.C is strong in tension and weak in compression.
13. Granules of cork are heated with ____________ oil to manufacture cork carpet.
14. The minimum depth of concrete at the crown in jack arch floors is _________
15. Arch in cement concrete jack flooring is made of __________ cement concrete.
16. How many components are there in cement concrete flooring?
17. Which grade of cement concrete is used in the construction of simple R.C.C. floors?
18. Damp prevention in timber flooring can be prevented by providing a DPC layer above the flooring.
19. ___________ flooring is available in two forms, namely, tiles and carpet.
20. In ________________ floors, the Steel bars and concrete are used to form of floor.
21. Cork used in cork flooring is obtained from the bark of _____________ tree.
22. With the development of _______________ construction technique, it is possible to prepare the precast unit for the floor.
23. ______________ flooring material is used when it is desired to transmit light to the floor below or to admit light to the basement from the upper floor.
24. In mosaic flooring, the surface is rubbed with __________ to make it smooth and polished.
25. __________________ material is used for cheap construction and for places where heavy articles are to be stacked as in case of godowns, Sheds, stores, etc.