Home > Energy Engineering > Quizzes > Energy Engineering Practice Test: Wind Energy
Energy Engineering Practice Test: Wind Energy
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 70% Most missed: “Name the type of windmill which consists of a sloping, horizontally weather boar…”
Wind energy is a renewable energy source that uses the power of the wind to generate electricity.  - Wind's caused by differences in temperature and pressure in the atmosphere. The sun heats the air, causing it to rise. When the air cools, a low pressure zone develops. Winds balance out these differences.  Here's how wind turbines generate electricity: Wind turbines use blades to collect the wind's kinetic energy. Wind flows over the blades, creating lift and causing the blades to turn. The blades are connected to a drive shaft that turns an electric generator, which produces... Show more
Energy Engineering Practice Test: Wind Energy
Time left 00:00
25 Questions

1. Select the formula for total power pt?
2. When was the Darrieus type machine invented?
3. What type of energy is wind energy?
4. Why recommendation of fixed ratio gears done for top mounted equipment?
5. What is the main source for the formation of wind?
6. What does Heating and cooling of the atmosphere generates?
7. Which are further improvements on smock mill?
8. Why is wind turbine designed to stop operation at cut out velocity?
9. Which type of windmill blades are made out of sheet metal or aluminum?
10. How many types of supporting tower for wind mill are generally used?
11. How many of windmills are there?
12. What is the total power produced if the turbine diameter is 120m?
13. Maintenance of constant output at all wind speeds above rating is called _________
14. When did the development of wind power in India began?
15. Why severe fluctuations in power are always undesirable in windmill?
16. Aero turbine is the fraction of power in the wind through the swept area which is converted into useful mechanical shaft power is called _____________
17. Why is Savonius rotor not suitable for installation?
18. Which part of the wind turbines senses wind speed, wind direction, shaft speed and torque?
19. A wind turbine designed too to come into operation at a minimum wind speed is called _________
20. Turbines with how many propellers are used in order to avoid vibrations?
21. A rotor installed in a fixed orientation with the swept area perpendicular to the pre dominate wind direction is called ___________
22. Which type of vertical wind machine has relatively low solidity and low starting torques?
23. Which type of wind machines are used at several residence or local use?
24. Which type of windmill has better performance?
25. Why blade velocity of wind turbine varies?