Home > Transportation Engineering > Quizzes > Highway Engineering Practice Test: Hill Roads
Highway Engineering Practice Test: Hill Roads
Fast practice, instant feedback. Timer auto-submits when time’s up.
Avg score: 86% Most missed: “The maximum gradient compensation for a radius of 150 m is _____________”
Hill Roads topics include: Hill roads, hill roads alignment, hill roads maintenance problems, hill roads geometrics and construction. A hill road is a road that passes through a terrain with a cross slope of 25% or more. In India, hill roads are also known as ghat roads. They are generally built in mountainous regions and are characterized by deep gorges, steep slopes, and widely differing elevations.  Hill roads are built with gradual slopes because it is safer and easier. A more inclined curve makes it easier to navigate, requiring less steering input.  The design, building, and upkeep... Show more
Highway Engineering Practice Test: Hill Roads
Time left 00:00
25 Questions

1. The flatter camber may be provided if the road has a longitudinal gradient greater than __________
2. The general route for alignment is selected during __________
3. The problem which doesn’t cause landslide in the hill road is?
4. What is the minimum setback?
5. The value recommended by IRC for a deviation angle of 0.16 and the design speed of 30 Kmph, the length of the summit curve is?
6. What is the minimum super elevation?
7. What is the strip length to be surveyed on the straight alignment?
8. For a speed of 30 Kmph, and radius of 30 m, the length of the transition curve is?
9. The right of way width in normal area for a two lane national highway is __________
10. The failure due to shear occurs in __________
11. On which road the maximum radius is provided?
12. The class division for 3 tonne vehicle is named as ________ by Border Roads Organisation.
13. What is the most important structure in a hill road?
14. The thickness of the pitching done by stone masonry to avoid erosion due to water is?
15. What is the speed limit on the national highway on hill road in Kmph?
16. What is the ISD value of the hill road with a speed of 50 Kmph?
17. The pavement width for a single lane road on a hill is __________
18. The absolute minimum radius of the curve in snow bound area is __________
19. The bench marks are fixed during the __________
20. What is the camber for high bitumen road?
21. The problems in snowfall region, of snow is not cleared is overcome by __________
22. What is the total resistance length of a road?
23. The length may be provided ________ times from height.
24. The hill road should be aligned __________
25. The important structure constructed above the road with out impacting the load is called __________